Seevalamuthu Mariappan <quic_seevalam@xxxxxxxxxxx> writes:
> Wakeup mhi is needed before pci_read/write only for QCA6390
> and WCN6855. Since wakeup & release mhi is enabled for all
> hardwares, below mhi assert is seen in QCN9074.
>
> Kernel panic - not syncing: dev_wake != 0
> CPU: 2 PID: 13535 Comm: procd Not tainted 4.4.60 #1
> Hardware name: Generic DT based system
> [<80316dac>] (unwind_backtrace) from [<80313700>] (show_stack+0x10/0x14)
> [<80313700>] (show_stack) from [<805135dc>] (dump_stack+0x7c/0x9c)
> [<805135dc>] (dump_stack) from [<8032136c>] (panic+0x84/0x1f8)
> [<8032136c>] (panic) from [<80549b24>] (mhi_pm_disable_transition+0x3b8/0x5b8)
> [<80549b24>] (mhi_pm_disable_transition) from [<80549ddc>] (mhi_power_down+0xb8/0x100)
> [<80549ddc>] (mhi_power_down) from [<7f5242b0>] (ath11k_mhi_op_status_cb+0x284/0x3ac [ath11k_pci])
> [E][__mhi_device_get_sync] Did not enter M0 state, cur_state:RESET pm_state:SHUTDOWN Process
> [E][__mhi_device_get_sync] Did not enter M0 state, cur_state:RESET pm_state:SHUTDOWN Process
> [E][__mhi_device_get_sync] Did not enter M0 state, cur_state:RESET pm_state:SHUTDOWN Process
> [<7f5242b0>] (ath11k_mhi_op_status_cb [ath11k_pci]) from [<7f524878>] (ath11k_mhi_stop+0x10/0x20 [ath11k_pci])
> [<7f524878>] (ath11k_mhi_stop [ath11k_pci]) from [<7f525b94>] (ath11k_pci_power_down+0x54/0x90 [ath11k_pci])
> [<7f525b94>] (ath11k_pci_power_down [ath11k_pci]) from [<8056b2a8>] (pci_device_shutdown+0x30/0x44)
> [<8056b2a8>] (pci_device_shutdown) from [<805cfa0c>] (device_shutdown+0x124/0x174)
> [<805cfa0c>] (device_shutdown) from [<8033aaa4>] (kernel_restart+0xc/0x50)
> [<8033aaa4>] (kernel_restart) from [<8033ada8>] (SyS_reboot+0x178/0x1ec)
> [<8033ada8>] (SyS_reboot) from [<80301b80>] (ret_fast_syscall+0x0/0x34)
>
> Hence, disable wakeup/release mhi using hw_param for other hardwares.
>
> Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01060-QCAHKSWPL_SILICONZ-1
>
> Fixes: a05bd85133 ("ath11k: read and write registers below unwindowed address")
> Signed-off-by: Seevalamuthu Mariappan <quic_seevalam@xxxxxxxxxxx>
The commit log is not quite clear, are you saying that commit a05bd85133
broke QCN9074 support altogether? Or it was failing only in some cases?
I can update the commit log.
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
