From: Seevalamuthu Mariappan <seevalam@xxxxxxxxxxxxxx> [ Upstream commit feab5bb8f1d4621025dceae7eef62d5f92de34ac ] pdev_id in structure 'wmi_pdev_bss_chan_info_event' is wrongly placed at the beginning. This causes invalid values in survey dump. Hence, align the structure with the firmware. Note: The firmware releases follow this order since the feature was implemented. Also, it is not changing across the branches including QCA6390. Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1 Signed-off-by: Ritesh Singh <ritesi@xxxxxxxxxxxxxx> Signed-off-by: Seevalamuthu Mariappan <seevalam@xxxxxxxxxxxxxx> Signed-off-by: Jouni Malinen <jouni@xxxxxxxxxxxxxx> Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx> Link: https://lore.kernel.org/r/20210720214922.118078-3-jouni@xxxxxxxxxxxxxx Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/net/wireless/ath/ath11k/wmi.c | 1 + drivers/net/wireless/ath/ath11k/wmi.h | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c index eca86225a3413..fca71e00123d9 100644 --- a/drivers/net/wireless/ath/ath11k/wmi.c +++ b/drivers/net/wireless/ath/ath11k/wmi.c @@ -1333,6 +1333,7 @@ int ath11k_wmi_pdev_bss_chan_info_request(struct ath11k *ar, WMI_TAG_PDEV_BSS_CHAN_INFO_REQUEST) | FIELD_PREP(WMI_TLV_LEN, sizeof(*cmd) - TLV_HDR_SIZE); cmd->req_type = type; + cmd->pdev_id = ar->pdev->pdev_id; ath11k_dbg(ar->ab, ATH11K_DBG_WMI, "WMI bss chan info req type %d\n", type); diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h index 5a32ba0eb4f57..c47adaab7918b 100644 --- a/drivers/net/wireless/ath/ath11k/wmi.h +++ b/drivers/net/wireless/ath/ath11k/wmi.h @@ -2935,6 +2935,7 @@ struct wmi_pdev_bss_chan_info_req_cmd { u32 tlv_header; /* ref wmi_bss_chan_info_req_type */ u32 req_type; + u32 pdev_id; } __packed; struct wmi_ap_ps_peer_cmd { @@ -4028,7 +4029,6 @@ struct wmi_vdev_stopped_event { } __packed; struct wmi_pdev_bss_chan_info_event { - u32 pdev_id; u32 freq; /* Units in MHz */ u32 noise_floor; /* units are dBm */ /* rx clear - how often the channel was unused */ @@ -4046,6 +4046,7 @@ struct wmi_pdev_bss_chan_info_event { /*rx_cycle cnt for my bss in 64bits format */ u32 rx_bss_cycle_count_low; u32 rx_bss_cycle_count_high; + u32 pdev_id; } __packed; #define WMI_VDEV_INSTALL_KEY_COMPL_STATUS_SUCCESS 0 -- 2.33.0
