On Mon, 2021-11-08 at 11:10 +0100, Lorenzo Bianconi wrote:
> > Hi Lore,
> >
> > The definition of cap->max_bw is identical to
> > ieee80211_sta_rx_bandwidth. For now, the value would be
> > IEEE80211_STA_RX_BW_160 if the chip supports bw160.
>
> ok, so why not something like:
>
> dev->phy.cap.has_bw160 = cap->max_bw == IEEE80211_STA_RX_BW_160;
>
> Regards,
> Lorenzo
Hi Lore,
Sure, we should do the assignment preciesly. I will update next
version.
Regards,
Deren
>
> >
> >
> > Regards,
> > Deren
> >
> > On Sun, 2021-11-07 at 11:45 +0100, Lorenzo Bianconi wrote:
> > > > From: Deren Wu <deren.wu@xxxxxxxxxxxx>
> > > >
> > > > Introduce the basic configuration for chips with BW160
> > > > capability
> > > >
> > > > Signed-off-by: Deren Wu <deren.wu@xxxxxxxxxxxx>
> > > > ---
> > > > drivers/net/wireless/mediatek/mt76/mt76.h | 1 +
> > > > drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c | 1 +
> > > > drivers/net/wireless/mediatek/mt76/mt7921/init.c | 4 ++++
> > > > drivers/net/wireless/mediatek/mt76/mt7921/main.c | 12
> > > > ++++++++++++
> > > > 4 files changed, 18 insertions(+)
> > > >
> > > > diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h
> > > > b/drivers/net/wireless/mediatek/mt76/mt76.h
> > > > index e2da720a91b6..babca8086027 100644
> > > > --- a/drivers/net/wireless/mediatek/mt76/mt76.h
> > > > +++ b/drivers/net/wireless/mediatek/mt76/mt76.h
> > > > @@ -346,6 +346,7 @@ struct mt76_hw_cap {
> > > > bool has_2ghz;
> > > > bool has_5ghz;
> > > > bool has_6ghz;
> > > > + bool has_bw160;
> > > > };
> > > >
> > > > #define MT_DRV_TXWI_NO_FREE BIT(0)
> > > > diff --git
> > > > a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> > > > b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> > > > index 26b4b875dcc0..4da20537aaf9 100644
> > > > --- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> > > > +++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> > > > @@ -1775,6 +1775,7 @@ static void
> > > > mt76_connac_mcu_parse_phy_cap(struct mt76_dev *dev,
> > > > dev->phy.chainmask = dev->phy.antenna_mask;
> > > > dev->phy.cap.has_2ghz = cap->hw_path & BIT(WF0_24G);
> > > > dev->phy.cap.has_5ghz = cap->hw_path & BIT(WF0_5G);
> > > > + dev->phy.cap.has_bw160 = (cap->max_bw >=
> > > > IEEE80211_STA_RX_BW_160);
> > >
> > > Hi Deren,
> > >
> > > just out of my curiosity, what are the possible values of cap-
> > > >max_bw
> > > here?
> > >
> > > Regards,
> > > Lorenzo
> > >
> > > > }
> > > >
> > > > int mt76_connac_mcu_get_nic_capability(struct mt76_phy *phy)
> > > > diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > > > b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > > > index 210998f086ab..30c0246fba3a 100644
> > > > --- a/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > > > +++ b/drivers/net/wireless/mediatek/mt76/mt7921/init.c
> > > > @@ -264,6 +264,10 @@ int mt7921_register_device(struct
> > > > mt7921_dev
> > > > *dev)
> > > > IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE
> > > > |
> > > > IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE
> > > > |
> > > > (3 <<
> > > > IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT);
> > > > + if (dev->mt76.phy.cap.has_bw160)
> > > > + dev->mphy.sband_5g.sband.vht_cap.cap |=
> > > > + IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MH
> > > > Z |
> > > > + IEEE80211_VHT_CAP_SHORT_GI_160;
> > > >
> > > > dev->mphy.hw->wiphy->available_antennas_rx = dev-
> > > > > mphy.chainmask;
> > > >
> > > > dev->mphy.hw->wiphy->available_antennas_tx = dev-
> > > > > mphy.chainmask;
> > > >
> > > > diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> > > > b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> > > > index 633c6d2a57ac..af8c675f909f 100644
> > > > --- a/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> > > > +++ b/drivers/net/wireless/mediatek/mt76/mt7921/main.c
> > > > @@ -128,11 +128,23 @@ mt7921_init_he_caps(struct mt7921_phy
> > > > *phy,
> > > > enum nl80211_band band,
> > > > IEEE80211_HE_PHY_CAP9_RX_1024_Q
> > > > AM_LESS_
> > > > THAN_242_TONE_RU |
> > > > IEEE80211_HE_PHY_CAP9_RX_FULL_B
> > > > W_SU_USI
> > > > NG_MU_WITH_COMP_SIGB |
> > > > IEEE80211_HE_PHY_CAP9_RX_FULL_B
> > > > W_SU_USI
> > > > NG_MU_WITH_NON_COMP_SIGB;
> > > > +
> > > > + if (phy->mt76->cap.has_bw160) {
> > > > + he_cap_elem->phy_cap_info[0] |=
> > > > + IEEE80211_HE_PHY_CAP0_C
> > > > HANNEL_W
> > > > IDTH_SET_160MHZ_IN_5G;
> > > > + he_cap_elem->phy_cap_info[8] |=
> > > > + IEEE80211_HE_PHY_CAP8_2
> > > > 0MHZ_IN_
> > > > 160MHZ_HE_PPDU |
> > > > + IEEE80211_HE_PHY_CAP8_8
> > > > 0MHZ_IN_
> > > > 160MHZ_HE_PPDU;
> > > > + }
> > > > break;
> > > > }
> > > >
> > > > he_mcs->rx_mcs_80 = cpu_to_le16(mcs_map);
> > > > he_mcs->tx_mcs_80 = cpu_to_le16(mcs_map);
> > > > + if (phy->mt76->cap.has_bw160) {
> > > > + he_mcs->rx_mcs_160 =
> > > > cpu_to_le16(mcs_map);
> > > > + he_mcs->tx_mcs_160 =
> > > > cpu_to_le16(mcs_map);
> > > > + }
> > > >
> > > > memset(he_cap->ppe_thres, 0, sizeof(he_cap-
> > > > > ppe_thres));
> > > >
> > > > if (he_cap_elem->phy_cap_info[6] &
> > > > --
> > > > 2.18.0
> > > >
> > >
> > > _______________________________________________
> > > Linux-mediatek mailing list
> > > Linux-mediatek@xxxxxxxxxxxxxxxxxxx
> > > http://lists.infradead.org/mailman/listinfo/linux-mediatek
>
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
