Search Linux Wireless

[PATCH 04/15] ath11k: allow only one interface up simultaneously for WCN6855

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Currently ath11k support both station/AP mode for WCN6855, and it is
configured with single_pdev_only, it means it has only one ath11k
and one ieee80211_hw which registered in mac80211 and one wiphy
registered in cfg80211. Now it does not have requirement to start
up both station and AP interface simultaneously for WCN6855, this
is to disable station and AP concurrency mode.

After this patch, when station interface is up, then AP interface
can not start up. AP interface can start up after station interface
down. Also when AP interface is up, station interface can not start
up. station interface can start up after AP interface down.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1

Signed-off-by: Wen Gong <quic_wgong@xxxxxxxxxxx>
---
 drivers/net/wireless/ath/ath11k/core.h |  5 +++++
 drivers/net/wireless/ath/ath11k/mac.c  | 17 ++++++++++++++++-
 2 files changed, 21 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath11k/core.h b/drivers/net/wireless/ath/ath11k/core.h
index a65f7d00eea2..e6c4963e41ac 100644
--- a/drivers/net/wireless/ath/ath11k/core.h
+++ b/drivers/net/wireless/ath/ath11k/core.h
@@ -972,4 +972,9 @@ static inline bool ath11k_support_cc_ext(struct ath11k_base *ab)
 	       test_bit(WMI_TLV_SERVICE_REG_CC_EXT_EVENT_SUPPORT, ab->wmi_ab.svc_map);
 }
 
+static inline bool ath11k_support_6G_cc_ext(struct ath11k *ar)
+{
+	return ath11k_support_cc_ext(ar->ab) && ar->supports_6ghz;
+}
+
 #endif /* _CORE_H_ */
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 61e70f3b4a7c..2d96eea9300d 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -6431,7 +6431,22 @@ static int ath11k_mac_setup_iface_combinations(struct ath11k *ar)
 
 	combinations[0].limits = limits;
 	combinations[0].n_limits = n_limits;
-	combinations[0].max_interfaces = 16;
+
+	/* When single pdev is set, there is only one ieee80211_hw/wiphy
+	 * of mac80211/cfg80211, and it has only one reg rules stored
+	 * The reg rules of 6 GHz is different for station and AP, please
+	 * refer WMI_REG_CHAN_LIST_CC_EXT_EVENTID handler.
+	 * When start station/AP simultaneously, there is not more
+	 * struct to store the second reg rules in cfg80211.
+	 * Also it does not have requirement for station/AP concurrency
+	 * for WCN6855, so disable it currently.
+	 */
+	if (ab->hw_params.single_pdev_only &&
+	    ath11k_support_6G_cc_ext(ar))
+		combinations[0].max_interfaces = 1;
+	else
+		combinations[0].max_interfaces = 16;
+
 	combinations[0].num_different_channels = 1;
 	combinations[0].beacon_int_infra_match = true;
 	combinations[0].beacon_int_min_gcd = 100;
-- 
2.31.1




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux