Firmware link offload monitoring can be made to work in 3/4 cases by switching on firmware feature bit WLANACTIVE_OFFLOAD - Secure power-save on - Secure power-save off - Open power-save on However, with an open AP if we switch off power-saving - thus never entering Beacon Mode Power Save - BMPS, firmware never forwards loss of beacon upwards. We had hoped that WLANACTIVE_OFFLOAD and some fixes for sequence numbers would unblock this but, it hasn't and further investigation is required. Its possible to have a complete set of Secure power-save on/off and Open power-save on/off provided we use Linux' link monitoring mechanism. While we debug the Open AP failure we need to fix upstream. This reverts commit c973fdad79f6eaf247d48b5fc77733e989eb01e1. Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx> --- drivers/net/wireless/ath/wcn36xx/main.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c index dd8810fd76a3d..fd8b2753da7dd 100644 --- a/drivers/net/wireless/ath/wcn36xx/main.c +++ b/drivers/net/wireless/ath/wcn36xx/main.c @@ -1334,7 +1334,6 @@ static int wcn36xx_init_ieee80211(struct wcn36xx *wcn) ieee80211_hw_set(wcn->hw, HAS_RATE_CONTROL); ieee80211_hw_set(wcn->hw, SINGLE_SCAN_ON_ALL_BANDS); ieee80211_hw_set(wcn->hw, REPORTS_TX_ACK_STATUS); - ieee80211_hw_set(wcn->hw, CONNECTION_MONITOR); wcn->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_AP) | -- 2.33.0
