Search Linux Wireless

[PATCH] wcn36xx: Channel list update before hardware scan

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The channel scan list must be updated before triggering a hardware scan
so that firmware takes into account the regulatory info for each single
channel such as active/passive config, power, DFS, etc... Without this
the firmware uses its own internal default channel configuration, which
is not aligned with mac80211 regulatory rules, and misses several
channels (e.g. 144).

Cc: stable@xxxxxxxxxxxxxxx
Fixes: 2f3bef4b247e ("wcn36xx: Add hardware scan offload support")
Signed-off-by: Loic Poulain <loic.poulain@xxxxxxxxxx>
---
 drivers/net/wireless/ath/wcn36xx/hal.h  | 27 +++++++++
 drivers/net/wireless/ath/wcn36xx/main.c |  1 +
 drivers/net/wireless/ath/wcn36xx/smd.c  | 98 +++++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/wcn36xx/smd.h  |  1 +
 4 files changed, 127 insertions(+)

diff --git a/drivers/net/wireless/ath/wcn36xx/hal.h b/drivers/net/wireless/ath/wcn36xx/hal.h
index 5f1f248..229a1c3 100644
--- a/drivers/net/wireless/ath/wcn36xx/hal.h
+++ b/drivers/net/wireless/ath/wcn36xx/hal.h
@@ -359,6 +359,8 @@ enum wcn36xx_hal_host_msg_type {
 	WCN36XX_HAL_START_SCAN_OFFLOAD_RSP = 205,
 	WCN36XX_HAL_STOP_SCAN_OFFLOAD_REQ = 206,
 	WCN36XX_HAL_STOP_SCAN_OFFLOAD_RSP = 207,
+	WCN36XX_HAL_UPDATE_CHANNEL_LIST_REQ = 208,
+	WCN36XX_HAL_UPDATE_CHANNEL_LIST_RSP = 209,
 	WCN36XX_HAL_SCAN_OFFLOAD_IND = 210,
 
 	WCN36XX_HAL_AVOID_FREQ_RANGE_IND = 233,
@@ -1353,6 +1355,31 @@ struct wcn36xx_hal_stop_scan_offload_rsp_msg {
 	u32 status;
 } __packed;
 
+#define WCN36XX_HAL_CHAN_FLAG_PASSIVE   BIT(7)
+#define WCN36XX_HAL_CHAN_FLAG_DFS       BIT(10)
+#define WCN36XX_HAL_CHAN_FLAG_HT        BIT(11)
+#define WCN36XX_HAL_CHAN_FLAG_VHT       BIT(12)
+#define WCN36XX_HAL_CHAN_PHY_MODE_11A   0
+#define WCN36XX_HAL_CHAN_PHY_MODE_11BG  1
+#define WCN36XX_HAL_DEFAULT_ANT_GAIN    6
+#define WCN36XX_HAL_DEFAULT_MIN_POWER   6
+
+struct wcn36xx_hal_channel_param {
+	u32 mhz;
+	u32 band_center_freq1;
+	u32 band_center_freq2;
+	u32 channel_info;
+	u32 reg_info_1;
+	u32 reg_info_2;
+} __packed;
+
+struct wcn36xx_hal_update_channel_list_req_msg {
+	struct wcn36xx_hal_msg_header header;
+
+	u8 num_channel;
+	struct wcn36xx_hal_channel_param channels[80];
+} __packed;
+
 enum wcn36xx_hal_rate_index {
 	HW_RATE_INDEX_1MBPS	= 0x82,
 	HW_RATE_INDEX_2MBPS	= 0x84,
diff --git a/drivers/net/wireless/ath/wcn36xx/main.c b/drivers/net/wireless/ath/wcn36xx/main.c
index 4f139d9..a42eae6 100644
--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -689,6 +689,7 @@ static int wcn36xx_hw_scan(struct ieee80211_hw *hw,
 
 	mutex_unlock(&wcn->scan_lock);
 
+	wcn36xx_smd_update_channel_list(wcn, &hw_req->req);
 	return wcn36xx_smd_start_hw_scan(wcn, vif, &hw_req->req);
 }
 
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index 3cecc8f..608d4cc 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -928,6 +928,103 @@ int wcn36xx_smd_stop_hw_scan(struct wcn36xx *wcn)
 	return ret;
 }
 
+static void wcn36xx_channel_set_max_power(struct wcn36xx_hal_channel_param *p, u32 max)
+{
+	u32 min = WCN36XX_HAL_DEFAULT_MIN_POWER;
+
+	if (min > max)
+		min = max;
+
+	p->reg_info_1 &= 0xffff0000;
+	p->reg_info_1 |= (min & 0xff) + ((max & 0xff) << 8);
+}
+
+static void wcn36xx_channel_set_reg_power(struct wcn36xx_hal_channel_param *p, u32 power)
+{
+	p->reg_info_1 &= 0xff00ffff;
+	p->reg_info_1 |= (power & 0xff) << 16;
+}
+
+static void wcn36xx_channel_set_class_id(struct wcn36xx_hal_channel_param *p, u32 id)
+{
+	p->reg_info_1 &= 0x00ffffff;
+	p->reg_info_1 |= (id & 0xff) << 24;
+}
+
+static void wcn36xx_channel_set_antenna_gain(struct wcn36xx_hal_channel_param *p, u32 gain)
+{
+	if (!gain)
+		gain = WCN36XX_HAL_DEFAULT_ANT_GAIN;
+
+	p->reg_info_2 = gain;
+}
+
+int wcn36xx_smd_update_channel_list(struct wcn36xx *wcn, struct cfg80211_scan_request *req)
+{
+	struct wcn36xx_hal_update_channel_list_req_msg *msg_body;
+	int ret, i;
+
+	msg_body = kzalloc(sizeof(*msg_body), GFP_KERNEL);
+	if (!msg_body)
+		return -ENOMEM;
+
+	INIT_HAL_MSG((*msg_body), WCN36XX_HAL_UPDATE_CHANNEL_LIST_REQ);
+
+	msg_body->num_channel = min_t(u8, req->n_channels, sizeof(msg_body->channels));
+	for (i = 0; i < msg_body->num_channel; i++) {
+		struct wcn36xx_hal_channel_param *param = &msg_body->channels[i];
+
+		param->mhz = req->channels[i]->center_freq;
+		param->band_center_freq1 = req->channels[i]->center_freq;
+		param->band_center_freq2 = 0;
+
+		if (req->channels[i]->flags & IEEE80211_CHAN_NO_IR)
+			param->channel_info |= WCN36XX_HAL_CHAN_FLAG_PASSIVE;
+
+		if (req->channels[i]->flags & IEEE80211_CHAN_RADAR)
+			param->channel_info |= WCN36XX_HAL_CHAN_FLAG_DFS;
+
+		if (req->channels[i]->band == NL80211_BAND_5GHZ) {
+			param->channel_info |= WCN36XX_HAL_CHAN_FLAG_HT;
+			param->channel_info |= WCN36XX_HAL_CHAN_FLAG_VHT;
+			param->channel_info |= WCN36XX_HAL_CHAN_PHY_MODE_11A;
+		} else {
+			param->channel_info |= WCN36XX_HAL_CHAN_PHY_MODE_11BG;
+		}
+
+		wcn36xx_channel_set_max_power(param, req->channels[i]->max_power);
+		wcn36xx_channel_set_reg_power(param, req->channels[i]->max_reg_power);
+		wcn36xx_channel_set_antenna_gain(param, req->channels[i]->max_antenna_gain);
+		wcn36xx_channel_set_class_id(param, 0); /* don't care ? */
+
+		wcn36xx_dbg(WCN36XX_DBG_HAL,
+			    "%s: freq=%u, channel_info=%08x, reg_info1=%08x, reg_info2=%08x\n",
+			    __func__, param->mhz, param->channel_info, param->reg_info_1,
+			    param->reg_info_2);
+	}
+
+	mutex_lock(&wcn->hal_mutex);
+
+	PREPARE_HAL_BUF(wcn->hal_buf, (*msg_body));
+
+	ret = wcn36xx_smd_send_and_wait(wcn, msg_body->header.len);
+	if (ret) {
+		wcn36xx_err("Sending hal_update_channel_list failed\n");
+		goto out;
+	}
+
+	ret = wcn36xx_smd_rsp_status_check(wcn->hal_buf, wcn->hal_rsp_len);
+	if (ret) {
+		wcn36xx_err("hal_update_channel_list response failed err=%d\n", ret);
+		goto out;
+	}
+
+out:
+	kfree(msg_body);
+	mutex_unlock(&wcn->hal_mutex);
+	return ret;
+}
+
 static int wcn36xx_smd_switch_channel_rsp(void *buf, size_t len)
 {
 	struct wcn36xx_hal_switch_channel_rsp_msg *rsp;
@@ -3138,6 +3235,7 @@ int wcn36xx_smd_rsp_process(struct rpmsg_device *rpdev,
 	case WCN36XX_HAL_HOST_RESUME_RSP:
 	case WCN36XX_HAL_ENTER_IMPS_RSP:
 	case WCN36XX_HAL_EXIT_IMPS_RSP:
+	case WCN36XX_HAL_UPDATE_CHANNEL_LIST_RSP:
 		memcpy(wcn->hal_buf, buf, len);
 		wcn->hal_rsp_len = len;
 		complete(&wcn->hal_rsp_compl);
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.h b/drivers/net/wireless/ath/wcn36xx/smd.h
index 5f98c1d..88e045d 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.h
+++ b/drivers/net/wireless/ath/wcn36xx/smd.h
@@ -70,6 +70,7 @@ int wcn36xx_smd_update_scan_params(struct wcn36xx *wcn, u8 *channels, size_t cha
 int wcn36xx_smd_start_hw_scan(struct wcn36xx *wcn, struct ieee80211_vif *vif,
 			      struct cfg80211_scan_request *req);
 int wcn36xx_smd_stop_hw_scan(struct wcn36xx *wcn);
+int wcn36xx_smd_update_channel_list(struct wcn36xx *wcn, struct cfg80211_scan_request *req);
 int wcn36xx_smd_add_sta_self(struct wcn36xx *wcn, struct ieee80211_vif *vif);
 int wcn36xx_smd_delete_sta_self(struct wcn36xx *wcn, u8 *addr);
 int wcn36xx_smd_delete_sta(struct wcn36xx *wcn, u8 sta_index);
-- 
2.7.4




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux