On 11/10/2021 12:51, Kalle Valo wrote:
Nicolas Cavallari <Nicolas.Cavallari@xxxxxxxxxxxxxxxxxxxxxxx> writes:
On 29/11/2020 16:30, Luca Coelho wrote:
From: Ilan Peer <ilan.peer@xxxxxxxxx>
When custom regulatory was set, only the channels setting was updated, but
the regulatory domain was not saved. Fix it by saving it.
Signed-off-by: Ilan Peer <ilan.peer@xxxxxxxxx>
Signed-off-by: Luca Coelho <luciano.coelho@xxxxxxxxx>
---
net/wireless/reg.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index a04fdfb35f07..094492b62f8a 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -2547,6 +2547,7 @@ static void handle_band_custom(struct wiphy *wiphy,
void wiphy_apply_custom_regulatory(struct wiphy *wiphy,
const struct ieee80211_regdomain *regd)
{
+ const struct ieee80211_regdomain *new_regd, *tmp;
enum nl80211_band band;
unsigned int bands_set = 0;
@@ -2566,6 +2567,13 @@ void wiphy_apply_custom_regulatory(struct
wiphy *wiphy,
* on your device's supported bands.
*/
WARN_ON(!bands_set);
+ new_regd = reg_copy_regd(regd);
+ if (IS_ERR(new_regd))
+ return;
+
+ tmp = get_wiphy_regdom(wiphy);
+ rcu_assign_pointer(wiphy->regd, new_regd);
+ rcu_free_regdom(tmp);
}
EXPORT_SYMBOL(wiphy_apply_custom_regulatory);
Hello,
This patch somehow appears to break ath9k's eeprom hints and restrict
it to the world regulatory domain on v5.12.10.
ath9k calls wiphy_apply_custom_regulatory() with its own kind of world
regulatory domain, before it decodes hints from the eeprom and uses
regulatory_hint() to request a specific alpha2.
With this patch, applying the hint fails because wiphy->regd is already set.
If i revert this patch, ath9k works again.
I have lost track, is this regression fixed now or is it sill
unresolved?
It appears to be still unresolved on 5.14.11 :
ath: EEPROM regdomain: 0x80fa
ath: EEPROM indicates we should expect a country code
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x37
ath: Country alpha2 being used: FR
ath: Regpair used: 0x37
yet,
$ iw reg get
global
country 00: DFS-UNSET
(2402 - 2472 @ 40), (N/A, 20), (N/A)
(2457 - 2482 @ 20), (N/A, 20), (N/A), AUTO-BW, PASSIVE-SCAN
(2474 - 2494 @ 20), (N/A, 20), (N/A), NO-OFDM, PASSIVE-SCAN
(5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW, PASSIVE-SCAN
(5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW, PASSIVE-SCAN
(5490 - 5730 @ 160), (N/A, 20), (0 ms), DFS, PASSIVE-SCAN
(5735 - 5835 @ 80), (N/A, 20), (N/A), PASSIVE-SCAN
(57240 - 63720 @ 2160), (N/A, 0), (N/A)
phy#1
country 99: DFS-UNSET
(2402 - 2472 @ 40), (N/A, 20), (N/A)
(5140 - 5360 @ 80), (N/A, 30), (N/A), PASSIVE-SCAN
(5715 - 5860 @ 80), (N/A, 30), (N/A), PASSIVE-SCAN
If i revert this patch, i get this instead:
global
country FR: DFS-ETSI
(2400 - 2483 @ 40), (N/A, 20), (N/A)
(5150 - 5250 @ 80), (N/A, 23), (N/A), NO-OUTDOOR, AUTO-BW
(5250 - 5350 @ 80), (N/A, 20), (0 ms), NO-OUTDOOR, DFS, AUTO-BW
(5470 - 5725 @ 160), (N/A, 26), (0 ms), DFS
(5725 - 5875 @ 80), (N/A, 13), (N/A)
(57000 - 66000 @ 2160), (N/A, 40), (N/A)
phy#2
country FR: DFS-ETSI
(2400 - 2483 @ 40), (N/A, 20), (N/A)
(5150 - 5250 @ 80), (N/A, 23), (N/A), NO-OUTDOOR, AUTO-BW
(5250 - 5350 @ 80), (N/A, 20), (0 ms), NO-OUTDOOR, DFS, AUTO-BW
(5470 - 5725 @ 160), (N/A, 26), (0 ms), DFS
(5725 - 5875 @ 80), (N/A, 13), (N/A)
(57000 - 66000 @ 2160), (N/A, 40), (N/A)
I'm not familiar with the regd code, but looking at where ath9k calls
wiphy_apply_custom_regulatory in ath_regd_init_wiphy()
(drivers/net/wireless/ath/regd.c):
wiphy->regulatory_flags |= REGULATORY_STRICT_REG |
REGULATORY_CUSTOM_REG;
if (ath_is_world_regd(reg)) {
/*
* Anything applied here (prior to wiphy registration) gets
* saved on the wiphy orig_* parameters
*/
regd = ath_world_regdomain(reg);
wiphy->regulatory_flags |= REGULATORY_COUNTRY_IE_FOLLOW_POWER;
} else {
/*
* This gets applied in the case of the absence of CRDA,
* it's our own custom world regulatory domain, similar to
* cfg80211's but we enable passive scanning.
*/
regd = ath_default_world_regdomain();
}
wiphy_apply_custom_regulatory(wiphy, regd);
Probably not calling wiphy_apply_custom_regulatory() in the non-world-regd case
would solve the problem ? i'm not sure if the comment is still valid.