Search Linux Wireless

Re: [RFC v2] mt76: mt7615: mt7622: fix ibss and meshpoint

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



My tests on todays OpenWrt Trunk with my and without my patch showed:
- MT7622: AP + AdHoc (only AP is working, in every case)
- BPI-MT7615: AP + AdHoc (with and without my patch still works).

I thought something would change if I apply my patch with the HW-Addresses. However everything stays the same:

With my patch:
AdHoc: Shenzhen_4e:4b:dd (38:83:9a:4e:4b:dd)
AP: address: 3a:83:9a:4e:4b:dd (3a:83:9a:4e:4b:dd)

Without my patch:
AdHoc: Shenzhen_4e:4b:dd (38:83:9a:4e:4b:dd)
AP: 3a:83:9a:4e:4b:dd (3a:83:9a:4e:4b:dd)

Bests
Nick

On 10/9/21 15:22, Daniel Golle wrote:
On Sat, Oct 09, 2021 at 12:37:53PM +0200, Nick wrote:
On 10/9/21 10:32, Kalle Valo wrote:

Nick Hainke <vincent@xxxxxxxxxxxx> writes:

Fixes: d8d59f66d136 ("mt76: mt7615: support 16 interfaces").
The fixes tag should be in the end, before Signed-off-by tags. But I can
fix that during commit.
Thanks for feedback. Already changed that locally but I did not want to spam
you with another RFC v3. :)
I was able to organize me a BPI-MT7615 PCIE Express Card. With and without
this patch beacons were sent on the mt7615 pcie, so the patch did not make
any difference. However, the mt7622 wifi will only work with my patch.
Does Mesh+AP or Ad-Hoc+AP also work on MT7622 and does it still work on
MT7615E card with your patch applied?



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux