Search Linux Wireless

Re: [PATCH 1/7] dt-bindings: nfc: nxp,nci: convert to dtschema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/10/2021 21:31, Rob Herring wrote:
> On Sun, 10 Oct 2021 16:23:11 +0200, Krzysztof Kozlowski wrote:
>> Convert the NXP NCI NFC controller to DT schema format.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
>> ---
>>  .../devicetree/bindings/net/nfc/nxp,nci.yaml  | 61 +++++++++++++++++++
>>  .../devicetree/bindings/net/nfc/nxp-nci.txt   | 33 ----------
>>  MAINTAINERS                                   |  1 +
>>  3 files changed, 62 insertions(+), 33 deletions(-)
>>  create mode 100644 Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml
>>  delete mode 100644 Documentation/devicetree/bindings/net/nfc/nxp-nci.txt
>>
> 
> Running 'make dtbs_check' with the schema in this patch gives the
> following warnings. Consider if they are expected or the schema is
> incorrect. These may not be new warnings.
> 
> Note that it is not yet a requirement to have 0 warnings for dtbs_check.
> This will change in the future.
> 
> Full log is available here: https://patchwork.ozlabs.org/patch/1539010
> 
> 
> nfc@28: 'clock-frequency' is a required property
> 	arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dt.yaml
> 
> nfc@28: compatible:0: 'nxp,nxp-nci-i2c' was expected
> 	arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dt.yaml
> 
> nfc@28: compatible: Additional items are not allowed ('nxp,nxp-nci-i2c' was unexpected)
> 	arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dt.yaml
> 
> nfc@28: compatible: ['nxp,pn547', 'nxp,nxp-nci-i2c'] is too long
> 	arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dt.yaml
> 
> nfc@30: 'clock-frequency' is a required property
> 	arch/arm/boot/dts/ste-ux500-samsung-janice.dt.yaml
> 
> nfc@30: compatible:0: 'nxp,nxp-nci-i2c' was expected
> 	arch/arm/boot/dts/ste-ux500-samsung-janice.dt.yaml
> 
> nfc@30: compatible: Additional items are not allowed ('nxp,nxp-nci-i2c' was unexpected)
> 	arch/arm/boot/dts/ste-ux500-samsung-janice.dt.yaml
> 
> nfc@30: compatible: ['nxp,pn547', 'nxp,nxp-nci-i2c'] is too long
> 	arch/arm/boot/dts/ste-ux500-samsung-janice.dt.yaml
> 

I missed that new compatible. I'll send a patch adding nxp,nxp-nci-i2c
and try to fix the DTS (missing clock-frequency).

Best regards,
Krzysztof



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux