Search Linux Wireless

Re: [PATCH] mt76: mt7921: add MU EDCA cmd support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> From: Sean Wang <sean.wang@xxxxxxxxxxxx>
> 
> Add MU EDCA MCU command support to update MU AC parameter record field
> from the access point.
> 
> Co-developed-by: Eric-SY Chang <Eric-SY.Chang@xxxxxxxxxxxx>
> Signed-off-by: Eric-SY Chang <Eric-SY.Chang@xxxxxxxxxxxx>
> Tested-by: Eric-SY Chang <Eric-SY.Chang@xxxxxxxxxxxx>
> Signed-off-by: Sean Wang <sean.wang@xxxxxxxxxxxx>
> ---
>  .../wireless/mediatek/mt76/mt76_connac_mcu.h  |  1 +
>  .../net/wireless/mediatek/mt76/mt7921/mcu.c   | 56 ++++++++++++++++++-
>  2 files changed, 54 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
> index cb36dd39221c..0ce670d65673 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
> +++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h
> @@ -563,6 +563,7 @@ enum {
>  	MCU_CMD_SCHED_SCAN_ENABLE = MCU_CE_PREFIX | 0x61,
>  	MCU_CMD_SCHED_SCAN_REQ = MCU_CE_PREFIX | 0x62,
>  	MCU_CMD_GET_NIC_CAPAB = MCU_CE_PREFIX | 0x8a,
> +	MCU_CMD_SET_MU_EDCA_PARMS = MCU_CE_PREFIX | 0xb0,
>  	MCU_CMD_REG_WRITE = MCU_CE_PREFIX | 0xc0,
>  	MCU_CMD_REG_READ = MCU_CE_PREFIX | MCU_QUERY_MASK | 0xc0,
>  	MCU_CMD_CHIP_CONFIG = MCU_CE_PREFIX | 0xca,
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
> index 56fb7e54e283..53b2eaad2af7 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
> @@ -974,7 +974,31 @@ int mt7921_mcu_set_tx(struct mt7921_dev *dev, struct ieee80211_vif *vif)
>  		.total = IEEE80211_NUM_ACS,
>  	};
>  	struct mt7921_vif *mvif = (struct mt7921_vif *)vif->drv_priv;
> -	int ac;
> +

can you please remove blank line here?

> +	struct mu_edca {
> +		u8 cw_min;
> +		u8 cw_max;
> +		u8 aifsn;
> +		u8 acm;
> +		u8 timer;
> +		u8 padding[3];
> +	};
> +	struct mt7921_mcu_mu_tx {
> +		u8 ver;
> +		u8 pad0;
> +		u16 len;

I guess __le16 here (even if it is not actually used)

Regards,
Lorenzo

> +		u8 bss_idx;
> +		u8 qos;
> +		u8 wmm_idx;
> +		u8 pad1;
> +		struct mu_edca edca[IEEE80211_NUM_ACS];
> +		u8 pad3[32];
> +	} __packed req_mu = {
> +		.bss_idx = mvif->mt76.idx,
> +		.qos = vif->bss_conf.qos,
> +		.wmm_idx = mvif->mt76.wmm_idx,
> +	};
> +	int ac, ret;
>  
>  	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
>  		struct ieee80211_tx_queue_params *q = &mvif->queue_params[ac];
> @@ -995,8 +1019,34 @@ int mt7921_mcu_set_tx(struct mt7921_dev *dev, struct ieee80211_vif *vif)
>  		else
>  			e->cw_max = cpu_to_le16(10);
>  	}
> -	return mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD_EDCA_UPDATE, &req,
> -				 sizeof(req), true);
> +
> +	ret = mt76_mcu_send_msg(&dev->mt76, MCU_EXT_CMD_EDCA_UPDATE, &req,
> +				sizeof(req), true);
> +	if (ret)
> +		return ret;
> +
> +	if (!vif->bss_conf.he_support)
> +		return 0;
> +
> +	for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
> +		struct ieee80211_he_mu_edca_param_ac_rec *q;
> +		struct mu_edca *e;
> +		int to_aci[] = {1, 0, 2, 3};
> +
> +		if (!mvif->queue_params[ac].mu_edca)
> +			break;
> +
> +		q = &mvif->queue_params[ac].mu_edca_param_rec;
> +		e = &(req_mu.edca[to_aci[ac]]);
> +
> +		e->cw_min = q->ecw_min_max & 0xf;
> +		e->cw_max = (q->ecw_min_max & 0xf0) >> 4;
> +		e->aifsn = q->aifsn;
> +		e->timer = q->mu_edca_timer;
> +	}
> +
> +	return mt76_mcu_send_msg(&dev->mt76, MCU_CMD_SET_MU_EDCA_PARMS, &req_mu,
> +				 sizeof(req_mu), false);
>  }
>  
>  int mt7921_mcu_set_chan_info(struct mt7921_phy *phy, int cmd)
> -- 
> 2.25.1
> 

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux