Search Linux Wireless

[PATCH 5/9] mwifiex: Update virtual interface counters right after setting bss_type

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In mwifiex_init_new_priv_params() we update our private driver state to
reflect the currently selected virtual interface type. Most notably we
set the bss_mode to the mode we're going to put the firmware in.

Now after we updated the driver state we actually start talking to the
firmware and instruct it to set up the new mode. Those commands can and
will sometimes fail, in which case we return with an error from
mwifiex_change_vif_to_*. We currently update our virtual interface type
counters after this return, which means the code is never reached when a
firmware error happens and we never update the counters. Since we have
updated our bss_mode earlier though, the counters now no longer reflect
the actual state of the driver.

This will break things on the next virtual interface change, because the
virtual interface type we're switching away from didn't get its counter
incremented, and we end up decrementing a 0-counter.

To fix this, simply update the virtual interface type counters right
after updating our driver structures, so that they are always in sync.

Signed-off-by: Jonas Dreßler <verdre@xxxxxxx>
---
 .../net/wireless/marvell/mwifiex/cfg80211.c   | 25 +++++++++++--------
 1 file changed, 14 insertions(+), 11 deletions(-)

diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
index 8b9517c243c8..f2797102c5a2 100644
--- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c
+++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c
@@ -1059,6 +1059,10 @@ mwifiex_change_vif_to_p2p(struct net_device *dev,
 	if (mwifiex_init_new_priv_params(priv, dev, type))
 		return -1;
 
+	update_vif_type_counter(adapter, curr_iftype, -1);
+	update_vif_type_counter(adapter, type, +1);
+	dev->ieee80211_ptr->iftype = type;
+
 	switch (type) {
 	case NL80211_IFTYPE_P2P_CLIENT:
 		if (mwifiex_cfg80211_init_p2p_client(priv))
@@ -1082,10 +1086,6 @@ mwifiex_change_vif_to_p2p(struct net_device *dev,
 	if (mwifiex_sta_init_cmd(priv, false, false))
 		return -1;
 
-	update_vif_type_counter(adapter, curr_iftype, -1);
-	update_vif_type_counter(adapter, type, +1);
-	dev->ieee80211_ptr->iftype = type;
-
 	return 0;
 }
 
@@ -1116,16 +1116,17 @@ mwifiex_change_vif_to_sta_adhoc(struct net_device *dev,
 		return -1;
 	if (mwifiex_init_new_priv_params(priv, dev, type))
 		return -1;
+
+	update_vif_type_counter(adapter, curr_iftype, -1);
+	update_vif_type_counter(adapter, type, +1);
+	dev->ieee80211_ptr->iftype = type;
+
 	if (mwifiex_send_cmd(priv, HostCmd_CMD_SET_BSS_MODE,
 			     HostCmd_ACT_GEN_SET, 0, NULL, true))
 		return -1;
 	if (mwifiex_sta_init_cmd(priv, false, false))
 		return -1;
 
-	update_vif_type_counter(adapter, curr_iftype, -1);
-	update_vif_type_counter(adapter, type, +1);
-	dev->ieee80211_ptr->iftype = type;
-
 	return 0;
 }
 
@@ -1152,15 +1153,17 @@ mwifiex_change_vif_to_ap(struct net_device *dev,
 		return -1;
 	if (mwifiex_init_new_priv_params(priv, dev, type))
 		return -1;
+
+	update_vif_type_counter(adapter, curr_iftype, -1);
+	update_vif_type_counter(adapter, type, +1);
+	dev->ieee80211_ptr->iftype = type;
+
 	if (mwifiex_send_cmd(priv, HostCmd_CMD_SET_BSS_MODE,
 			     HostCmd_ACT_GEN_SET, 0, NULL, true))
 		return -1;
 	if (mwifiex_sta_init_cmd(priv, false, false))
 		return -1;
 
-	update_vif_type_counter(adapter, curr_iftype, -1);
-	update_vif_type_counter(adapter, type, +1);
-	dev->ieee80211_ptr->iftype = type;
 	return 0;
 }
 /*
-- 
2.31.1




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux