Search Linux Wireless

[PATCH v2 03/33] staging: wfx: ignore PS when STA/AP share same channel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Jérôme Pouiller <jerome.pouiller@xxxxxxxxxx>

When multiple interface are in use. One is always AP while the other is
always station. When the two interface use the same channel, it makes no
sense to enabled Power Saving (PS) on the station. Indeed, because of
the AP, the device will be kept awake on this channel anyway.

In add, when multiple interface are in use, mac80211 does not update the
PS information and delegate to the driver responsibility to do the
right thing.

Thus, in the current code, when the user enable PS in this
configuration, the driver finally enable PS-Poll which is probably not
what the user expected.

This patch detect this case and applies a sane configuration in all
cases.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@xxxxxxxxxx>
---
 drivers/staging/wfx/sta.c | 32 ++++++++++++++++++++------------
 1 file changed, 20 insertions(+), 12 deletions(-)

diff --git a/drivers/staging/wfx/sta.c b/drivers/staging/wfx/sta.c
index 5de9ccf02285..aff0559653bf 100644
--- a/drivers/staging/wfx/sta.c
+++ b/drivers/staging/wfx/sta.c
@@ -154,18 +154,26 @@ static int wfx_get_ps_timeout(struct wfx_vif *wvif, bool *enable_ps)
 		chan0 = wdev_to_wvif(wvif->wdev, 0)->vif->bss_conf.chandef.chan;
 	if (wdev_to_wvif(wvif->wdev, 1))
 		chan1 = wdev_to_wvif(wvif->wdev, 1)->vif->bss_conf.chandef.chan;
-	if (chan0 && chan1 && chan0->hw_value != chan1->hw_value &&
-	    wvif->vif->type != NL80211_IFTYPE_AP) {
-		// It is necessary to enable powersave if channels
-		// are different.
-		if (enable_ps)
-			*enable_ps = true;
-		if (wvif->wdev->force_ps_timeout > -1)
-			return wvif->wdev->force_ps_timeout;
-		else if (wfx_api_older_than(wvif->wdev, 3, 2))
-			return 0;
-		else
-			return 30;
+	if (chan0 && chan1 && wvif->vif->type != NL80211_IFTYPE_AP) {
+		if (chan0->hw_value == chan1->hw_value) {
+			// It is useless to enable PS if channels are the same.
+			if (enable_ps)
+				*enable_ps = false;
+			if (wvif->vif->bss_conf.assoc && wvif->vif->bss_conf.ps)
+				dev_info(wvif->wdev->dev, "ignoring requested PS mode");
+			return -1;
+		} else {
+			// It is necessary to enable PS if channels
+			// are different.
+			if (enable_ps)
+				*enable_ps = true;
+			if (wvif->wdev->force_ps_timeout > -1)
+				return wvif->wdev->force_ps_timeout;
+			else if (wfx_api_older_than(wvif->wdev, 3, 2))
+				return 0;
+			else
+				return 30;
+		}
 	}
 	if (enable_ps)
 		*enable_ps = wvif->vif->bss_conf.ps;
-- 
2.33.0





[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux