Search Linux Wireless

Re: [PATCH] wcn36xx: handle connection loss indication

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thanks for the investigation!

As discussed offline, I will send v2 with Fixes: removed, and Bryan will test and submit a separate patch to add the additional feat_caps for the power_save off case.

Depending on DB410c testing, these feat_caps may need to be gated for WCN3680 only, in which case Loic's patch to re-enable CONNECTION_MONITOR (but gated for WCN3660/3620) would still be needed.

Ben

On 9/1/21 4:56 AM, Bryan O'Donoghue wrote:
> On 01/09/2021 07:40, Loic Poulain wrote:
>> iw wlan0 set power_save off
> 
> I do this on wcn3680b and get no loss of signal
> 
> If I do this though
> 
> diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
> index 03966072f34c..ba613fbb728d 100644
> --- a/drivers/net/wireless/ath/wcn36xx/smd.c
> +++ b/drivers/net/wireless/ath/wcn36xx/smd.c
> @@ -2345,6 +2345,8 @@ int wcn36xx_smd_feature_caps_exchange(struct wcn36xx *wcn)
>                 set_feat_caps(msg_body.feat_caps, DOT11AC);
>                 set_feat_caps(msg_body.feat_caps, ANTENNA_DIVERSITY_SELECTION);
>         }
> +       set_feat_caps(msg_body.feat_caps, IBSS_HEARTBEAT_OFFLOAD);
> +       set_feat_caps(msg_body.feat_caps, WLANACTIVE_OFFLOAD);
> 
>         PREPARE_HAL_BUF(wcn->hal_buf, msg_body);
> 
> @@ -2589,7 +2591,7 @@ static int wcn36xx_smd_missed_beacon_ind(struct wcn36xx *wcn,
>         struct wcn36xx_hal_missed_beacon_ind_msg *rsp = buf;
>         struct ieee80211_vif *vif = NULL;
>         struct wcn36xx_vif *tmp;
> -
> +wcn36xx_info("%s/%d\n", __func__, __LINE__);
>         /* Old FW does not have bss index */
>         if (wcn36xx_is_fw_version(wcn, 1, 2, 2, 24)) {
>                 list_for_each_entry(tmp, &wcn->vif_list, list) {
> @@ -2608,7 +2610,7 @@ static int wcn36xx_smd_missed_beacon_ind(struct wcn36xx *wcn,
> 
>         list_for_each_entry(tmp, &wcn->vif_list, list) {
>                 if (tmp->bss_index == rsp->bss_index) {
> -                       wcn36xx_dbg(WCN36XX_DBG_HAL, "beacon missed bss_index %d\n",
> +                       wcn36xx_info("beacon missed bss_index %d\n",
>                                     rsp->bss_index);
>                         vif = wcn36xx_priv_to_vif(tmp);
>                         ieee80211_connection_loss(vif);
> 
> 
> bingo
> 
> root@linaro-developer:~# iw wlan0 set power_save off
> 
> 
> # pulls plug on AP
> 
> root@linaro-developer:~# [   83.290987] wcn36xx: wcn36xx_smd_missed_beacon_ind/2594
> [   83.291070] wcn36xx: beacon missed bss_index 0
> [   83.295403] wlan0: Connection to AP e2:63:da:9c:a4:bd lost
> 
> I'm not sure if both flags are required but, this is the behavior we want
> 



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux