Search Linux Wireless

Re: [PATCH 1/3] rsi: fix occasional initialisation failure with BT coex

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Martin Fuzzey <martin.fuzzey@flowbird.group> wrote:

> When BT coexistence is enabled (eg oper mode 13, which is the default)
> the initialisation on startup sometimes silently fails.
> 
> In a normal initialisation we see
> 	usb 1-1.3: Product: Wireless USB Network Module
> 	usb 1-1.3: Manufacturer: Redpine Signals, Inc.
> 	usb 1-1.3: SerialNumber: 000000000001
> 	rsi_91x: rsi_probe: Initialized os intf ops
> 	rsi_91x: rsi_load_9116_firmware: Loading chunk 0
> 	rsi_91x: rsi_load_9116_firmware: Loading chunk 1
> 	rsi_91x: rsi_load_9116_firmware: Loading chunk 2
> 	rsi_91x: Max Stations Allowed = 1
> 
> But sometimes the last log is missing and the wlan net device is
> not created.
> 
> Running a userspace loop that resets the hardware via a GPIO shows the
> problem occurring ~5/100 resets.
> 
> The problem does not occur in oper mode 1 (wifi only).
> 
> Adding logs shows that the initialisation state machine requests a MAC
> reset via rsi_send_reset_mac() but the firmware does not reply, leading
> to the initialisation sequence being incomplete.
> 
> Fix this by delaying attaching the BT adapter until the wifi
> initialisation has completed.
> 
> With this applied I have done > 300 reset loops with no errors.
> 
> Fixes: 716b840c7641 ("rsi: handle BT traffic in driver")
> Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
> CC: stable@xxxxxxxxxxxxxxx

Failed to apply, please rebase on top of wireless-drivers-next.

error: sha1 information is lacking or useless (drivers/net/wireless/rsi/rsi_91x_mgmt.c).
error: could not build fake ancestor
hint: Use 'git am --show-current-patch' to see the failed patch
Applying: rsi: fix occasional initialisation failure with BT coex
Patch failed at 0001 rsi: fix occasional initialisation failure with BT coex

3 patches set to Changes Requested.

12423167 [1/3] rsi: fix occasional initialisation failure with BT coex
12423171 [2/3] rsi: fix key enabled check causing unwanted encryption for vap_id > 0
12423173 [3/3] rsi: fix rate mask set leading to P2P failure

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/1628245403-2517-2-git-send-email-martin.fuzzey@flowbird.group/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux