Search Linux Wireless

Re: [ath5k-devel] [PATCH 1/1] Ath5k: add AP mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Gents it is great to see this happen one snippet more and you will be able to set the interface into AP mode from userspace hostapd and friends.


diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index e09ed2c..69aad6e 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -488,6 +488,7 @@ ath5k_pci_probe(struct pci_dev *pdev,

       hw->wiphy->interface_modes =
               BIT(NL80211_IFTYPE_STATION) |
+               BIT(NL80211_IFTYPE_AP) |
               BIT(NL80211_IFTYPE_ADHOC) |
               BIT(NL80211_IFTYPE_MESH_POINT);


i have had it working and no complaints so far.

please note that as with mac80211_hwsim it is dependent on a patch

Documentation/networking/mac80211_hwsim/README

Please note that the current Linux kernel does not enable AP mode, so a
simple patch is needed to enable AP mode selection:
http://johannes.sipsolutions.net/patches/kernel/all/LATEST/006-allow-ap-vlan-modes.patch

-->

Subject: mac80211: allow AP and VLAN modes

This patch allows switching interfaces into AP/VLAN modes using
cfg80211 (nl80211). Don't allow doing it with wext because then
people will just attempt to do it manually (without hostapd) and
complain that it doesn't work.

Signed-off-by: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
---
net/mac80211/cfg.c |    2 ++
1 file changed, 2 insertions(+)

--- everything.orig/net/mac80211/cfg.c	2008-09-26 15:07:22.000000000 +0200
+++ everything/net/mac80211/cfg.c	2008-09-26 15:09:06.000000000 +0200
@@ -33,6 +33,8 @@ static bool nl80211_type_check(enum nl80
#ifdef CONFIG_MAC80211_MESH
	case NL80211_IFTYPE_MESH_POINT:
#endif
+	case NL80211_IFTYPE_AP:
+	case NL80211_IFTYPE_AP_VLAN:
	case NL80211_IFTYPE_WDS:
		return true;
	default:


<--


Regards Greg

Jiri Slaby wrote:
Add support for AP mode. This involves:
- enablement in ath5k_beacon_config -- initialize beacon timer
- add AP to the supported modes in ath5k_add_interface
- handle beacon change even for AP in ath5k_config_interface
- remove useless test for IBSS in ath5k_beacon_update

Signed-off-by: Jiri Slaby <jirislaby@xxxxxxxxx>
Cc: Nick Kossifidis <mickflemm@xxxxxxxxx>
Cc: Luis R. Rodriguez <mcgrof@xxxxxxxxx>
---
 drivers/net/wireless/ath5k/base.c |   42 +++++++++++++++----------------------
 1 files changed, 17 insertions(+), 25 deletions(-)

diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index e09ed2c..d5d8e2d 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c

--
This message has been scanned for viruses and
dangerous content by Network Sentry, and is believed to be clean.
http://www.dialandsave.co.za

--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]
  Powered by Linux