> From: YN Chen <YN.Chen@xxxxxxxxxxxx>
>
> Consider .max_reg_power in struct ieee80211_channel to limit the
> maximum power the wireless device allowed to transmit on the
> corresponding channel according to the regulatory domain.
>
> Co-developed-by: Sean Wang <sean.wang@xxxxxxxxxxxx>
> Signed-off-by: Sean Wang <sean.wang@xxxxxxxxxxxx>
> Signed-off-by: YN Chen <YN.Chen@xxxxxxxxxxxx>
> ---
> .../wireless/mediatek/mt76/mt76_connac_mcu.c | 43 ++++++++++++++++++-
> 1 file changed, 41 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> index d71393b1c5e6..84f42ce12626 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c
> @@ -1773,6 +1773,43 @@ static s8 mt76_connac_get_sar_power(struct mt76_phy *phy,
> return target_power;
> }
>
> +static s8 mt76_connac_get_ch_power(struct mt76_phy *phy,
> + struct ieee80211_channel *chan,
> + s8 target_power)
> +{
> + struct mt76_dev *dev = phy->dev;
is it used?
> + struct ieee80211_supported_band *sband;
> + int i;
> +
> + switch (chan->band) {
> + case NL80211_BAND_2GHZ:
> + sband = &phy->sband_2g.sband;
> + break;
> + case NL80211_BAND_5GHZ:
> + sband = &phy->sband_5g.sband;
> + break;
> + default:
> + return target_power;
> + }
> +
> + for (i = 0; i < sband->n_channels; i++) {
> + struct ieee80211_channel *ch = &sband->channels[i];
> +
> + if (ch->hw_value == chan->hw_value) {
> + if (!(ch->flags & IEEE80211_CHAN_DISABLED)) {
> + int power = 2 * ch->max_reg_power;
> +
> + if (power > 127 || power < -127)
> + power = 127;
please correct me if I am wrong, but I guess the limit for mt7663 should be 63,
isn't it?
Regards,
Lorenzo
> + target_power = min_t(s8, power, target_power);
> + }
> + break;
> + }
> + }
> +
> + return target_power;
> +}
> +
> static int
> mt76_connac_mcu_rate_txpower_band(struct mt76_phy *phy,
> enum nl80211_band band)
> @@ -1840,10 +1877,12 @@ mt76_connac_mcu_rate_txpower_band(struct mt76_phy *phy,
> .hw_value = ch_list[idx],
> .band = band,
> };
> - s8 sar_power;
> + s8 reg_power, sar_power;
>
> + reg_power = mt76_connac_get_ch_power(phy, &chan,
> + tx_power);
> sar_power = mt76_connac_get_sar_power(phy, &chan,
> - tx_power);
> + reg_power);
>
> mt76_get_rate_power_limits(phy, &chan, &limits,
> sar_power);
> --
> 2.25.1
>
Attachment:
signature.asc
Description: PGP signature
