From: Chin-Yen Lee <timlee@xxxxxxxxxxx>
In current wow flow, driver calls rtw_wow_fw_start and sleep for 100ms,
to wait firmware finish preliminary work and then update the value of
WOWLAN_WAKE_REASON register to zero. But later firmware will start wow
function with power-saving mode, in which mode the value of
WOWLAN_WAKE_REASON register is 0xea. So driver may get 0xea value and
return fail. We use read_poll_timeout instead to check the value to avoid
this issue.
Signed-off-by: Chin-Yen Lee <timlee@xxxxxxxxxxx>
Signed-off-by: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
---
drivers/net/wireless/realtek/rtw88/wow.c | 21 ++++++++++++++++-----
1 file changed, 16 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw88/wow.c b/drivers/net/wireless/realtek/rtw88/wow.c
index fc9544f4e5e4..bdccfa70dddc 100644
--- a/drivers/net/wireless/realtek/rtw88/wow.c
+++ b/drivers/net/wireless/realtek/rtw88/wow.c
@@ -283,15 +283,26 @@ static void rtw_wow_rx_dma_start(struct rtw_dev *rtwdev)
static int rtw_wow_check_fw_status(struct rtw_dev *rtwdev, bool wow_enable)
{
- /* wait 100ms for wow firmware to finish work */
- msleep(100);
+ int ret;
+ u8 check;
+ u32 check_dis;
if (wow_enable) {
- if (rtw_read8(rtwdev, REG_WOWLAN_WAKE_REASON))
+ ret = read_poll_timeout(rtw_read8, check, !check, 1000,
+ 100000, true, rtwdev,
+ REG_WOWLAN_WAKE_REASON);
+ if (ret)
goto wow_fail;
} else {
- if (rtw_read32_mask(rtwdev, REG_FE1IMR, BIT_FS_RXDONE) ||
- rtw_read32_mask(rtwdev, REG_RXPKT_NUM, BIT_RW_RELEASE))
+ ret = read_poll_timeout(rtw_read32_mask, check_dis,
+ !check_dis, 1000, 100000, true, rtwdev,
+ REG_FE1IMR, BIT_FS_RXDONE);
+ if (ret)
+ goto wow_fail;
+ ret = read_poll_timeout(rtw_read32_mask, check_dis,
+ !check_dis, 1000, 100000, false, rtwdev,
+ REG_RXPKT_NUM, BIT_RW_RELEASE);
+ if (ret)
goto wow_fail;
}
--
2.25.1
