From: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
Frequency in rx status is being filled incorrectly in the 6 GHz band as
channel number received is invalid in this case which is causing packet
drops. So fix that.
Fixes: 5dcf42f8b79d ("ath11k: Use freq instead of channel number in rx path")
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@xxxxxxxxxxxxxx>
Signed-off-by: Jouni Malinen <jouni@xxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath11k/dp_rx.c | 9 ++++++---
drivers/net/wireless/ath/ath11k/wmi.c | 10 +++++++---
2 files changed, 13 insertions(+), 6 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/dp_rx.c b/drivers/net/wireless/ath/ath11k/dp_rx.c
index 9d9af6d65afd..90da56316e7e 100644
--- a/drivers/net/wireless/ath/ath11k/dp_rx.c
+++ b/drivers/net/wireless/ath/ath11k/dp_rx.c
@@ -2393,8 +2393,10 @@ static void ath11k_dp_rx_h_ppdu(struct ath11k *ar, struct hal_rx_desc *rx_desc,
channel_num = meta_data;
center_freq = meta_data >> 16;
- if (center_freq >= 5935 && center_freq <= 7105) {
+ if (center_freq >= ATH11K_MIN_6G_FREQ &&
+ center_freq <= ATH11K_MAX_6G_FREQ) {
rx_status->band = NL80211_BAND_6GHZ;
+ rx_status->freq = center_freq;
} else if (channel_num >= 1 && channel_num <= 14) {
rx_status->band = NL80211_BAND_2GHZ;
} else if (channel_num >= 36 && channel_num <= 173) {
@@ -2412,8 +2414,9 @@ static void ath11k_dp_rx_h_ppdu(struct ath11k *ar, struct hal_rx_desc *rx_desc,
rx_desc, sizeof(struct hal_rx_desc));
}
- rx_status->freq = ieee80211_channel_to_frequency(channel_num,
- rx_status->band);
+ if (rx_status->band != NL80211_BAND_6GHZ)
+ rx_status->freq = ieee80211_channel_to_frequency(channel_num,
+ rx_status->band);
ath11k_dp_rx_h_rate(ar, rx_desc, rx_status);
}
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index 5e196829ecf3..e7429d17030b 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -6184,8 +6184,10 @@ static void ath11k_mgmt_rx_event(struct ath11k_base *ab, struct sk_buff *skb)
if (rx_ev.status & WMI_RX_STATUS_ERR_MIC)
status->flag |= RX_FLAG_MMIC_ERROR;
- if (rx_ev.chan_freq >= ATH11K_MIN_6G_FREQ) {
+ if (rx_ev.chan_freq >= ATH11K_MIN_6G_FREQ &&
+ rx_ev.chan_freq <= ATH11K_MAX_6G_FREQ) {
status->band = NL80211_BAND_6GHZ;
+ status->freq = rx_ev.chan_freq;
} else if (rx_ev.channel >= 1 && rx_ev.channel <= 14) {
status->band = NL80211_BAND_2GHZ;
} else if (rx_ev.channel >= 36 && rx_ev.channel <= ATH11K_MAX_5G_CHAN) {
@@ -6206,8 +6208,10 @@ static void ath11k_mgmt_rx_event(struct ath11k_base *ab, struct sk_buff *skb)
sband = &ar->mac.sbands[status->band];
- status->freq = ieee80211_channel_to_frequency(rx_ev.channel,
- status->band);
+ if (status->band != NL80211_BAND_6GHZ)
+ status->freq = ieee80211_channel_to_frequency(rx_ev.channel,
+ status->band);
+
status->signal = rx_ev.snr + ATH11K_DEFAULT_NOISE_FLOOR;
status->rate_idx = ath11k_mac_bitrate_to_idx(sband, rx_ev.rate / 100);
--
2.25.1
