From: P Praneesh <ppranees@xxxxxxxxxxxxxx>
When the driver sends a peer create cmd, the firmware responds with
WMI_PEER_CREATE_CONF_EVENTID to confirm the firmware received
WMI_PEER_CREATE_CMDID. Since the peer create conf event is not handled
in ath11k_wmi_tlv_op_rx, we are getting unknown event id warning prints
during peer creation.
Add WMI_PEER_CREATE_CONF_EVENTID in wmi_tlv_event_id and handle
the same as unsupported event id under wmi logs.
warning prints:
[ 4382.230817] ath11k_pci 0000:01:00.0: Unknown eventid: 0x601a
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01695-QCAHKSWPL_SILICONZ-1
Signed-off-by: P Praneesh <ppranees@xxxxxxxxxxxxxx>
Signed-off-by: Jouni Malinen <jouni@xxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath11k/wmi.c | 1 +
drivers/net/wireless/ath/ath11k/wmi.h | 3 +++
2 files changed, 4 insertions(+)
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index 020b2b7ee3c8..6d2696db1e07 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -7130,6 +7130,7 @@ static void ath11k_wmi_tlv_op_rx(struct ath11k_base *ab, struct sk_buff *skb)
case WMI_TWT_ENABLE_EVENTID:
case WMI_TWT_DISABLE_EVENTID:
case WMI_PDEV_DMA_RING_CFG_RSP_EVENTID:
+ case WMI_PEER_CREATE_CONF_EVENTID:
ath11k_dbg(ab, ATH11K_DBG_WMI,
"ignoring unsupported event 0x%x\n", id);
break;
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index 16b3f48bb378..2587d22f42ce 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -663,6 +663,9 @@ enum wmi_tlv_event_id {
WMI_PEER_RESERVED9_EVENTID,
WMI_PEER_RESERVED10_EVENTID,
WMI_PEER_OPER_MODE_CHANGE_EVENTID,
+ WMI_PEER_TX_PN_RESPONSE_EVENTID,
+ WMI_PEER_CFR_CAPTURE_EVENTID,
+ WMI_PEER_CREATE_CONF_EVENTID,
WMI_MGMT_RX_EVENTID = WMI_TLV_CMD(WMI_GRP_MGMT),
WMI_HOST_SWBA_EVENTID,
WMI_TBTTOFFSET_UPDATE_EVENTID,
--
2.25.1
