From: Anilkumar Kolli <akolli@xxxxxxxxxxxxxx>
Reuse board_size from hw_params, add cal_offset to hw params.
This patch is clean up only, there is no change in functionality.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01838-QCAHKSWPL_SILICONZ-1
Signed-off-by: Anilkumar Kolli <akolli@xxxxxxxxxxxxxx>
Signed-off-by: Jouni Malinen <jouni@xxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath11k/core.c | 10 +++++-----
drivers/net/wireless/ath/ath11k/hw.h | 2 +-
drivers/net/wireless/ath/ath11k/qmi.c | 4 ++--
drivers/net/wireless/ath/ath11k/qmi.h | 2 --
4 files changed, 8 insertions(+), 10 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index c97830633f1f..d2ab3b134632 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -37,7 +37,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
.fw = {
.dir = "IPQ8074/hw2.0",
.board_size = 256 * 1024,
- .cal_size = 256 * 1024,
+ .cal_offset = 128 * 1024,
},
.max_radios = 3,
.bdf_addr = 0x4B0C0000,
@@ -87,7 +87,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
.fw = {
.dir = "IPQ6018/hw1.0",
.board_size = 256 * 1024,
- .cal_size = 256 * 1024,
+ .cal_offset = 128 * 1024,
},
.max_radios = 2,
.bdf_addr = 0x4ABC0000,
@@ -134,7 +134,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
.fw = {
.dir = "QCA6390/hw2.0",
.board_size = 256 * 1024,
- .cal_size = 256 * 1024,
+ .cal_offset = 128 * 1024,
},
.max_radios = 3,
.bdf_addr = 0x4B0C0000,
@@ -180,7 +180,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
.fw = {
.dir = "QCN9074/hw1.0",
.board_size = 256 * 1024,
- .cal_size = 256 * 1024,
+ .cal_offset = 128 * 1024,
},
.max_radios = 1,
.single_pdev_only = false,
@@ -226,7 +226,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
.fw = {
.dir = "WCN6855/hw2.0",
.board_size = 256 * 1024,
- .cal_size = 256 * 1024,
+ .cal_offset = 128 * 1024,
},
.max_radios = 3,
.bdf_addr = 0x4B0C0000,
diff --git a/drivers/net/wireless/ath/ath11k/hw.h b/drivers/net/wireless/ath/ath11k/hw.h
index 5d150cd793b2..3a03e09563e7 100644
--- a/drivers/net/wireless/ath/ath11k/hw.h
+++ b/drivers/net/wireless/ath/ath11k/hw.h
@@ -128,7 +128,7 @@ struct ath11k_hw_params {
struct {
const char *dir;
size_t board_size;
- size_t cal_size;
+ size_t cal_offset;
} fw;
const struct ath11k_hw_ops *hw_ops;
diff --git a/drivers/net/wireless/ath/ath11k/qmi.c b/drivers/net/wireless/ath/ath11k/qmi.c
index b5e34d670715..cc82a431c8b7 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.c
+++ b/drivers/net/wireless/ath/ath11k/qmi.c
@@ -1953,7 +1953,7 @@ ath11k_qmi_prepare_bdf_download(struct ath11k_base *ab, int type,
fw_size = min_t(u32, ab->hw_params.fw.board_size,
fw_entry->size);
- memcpy_toio(bdf_addr + ATH11K_QMI_CALDATA_OFFSET,
+ memcpy_toio(bdf_addr + ab->hw_params.fw.cal_offset,
fw_entry->data, fw_size);
release_firmware(fw_entry);
@@ -1979,7 +1979,7 @@ static int ath11k_qmi_load_bdf_fixed_addr(struct ath11k_base *ab)
return -ENOMEM;
memset(&resp, 0, sizeof(resp));
- bdf_addr = ioremap(ab->hw_params.bdf_addr, ATH11K_QMI_BDF_MAX_SIZE);
+ bdf_addr = ioremap(ab->hw_params.bdf_addr, ab->hw_params.fw.board_size);
if (!bdf_addr) {
ath11k_warn(ab, "failed ioremap for board file\n");
ret = -EIO;
diff --git a/drivers/net/wireless/ath/ath11k/qmi.h b/drivers/net/wireless/ath/ath11k/qmi.h
index 3d5930330703..30236c5d26e2 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.h
+++ b/drivers/net/wireless/ath/ath11k/qmi.h
@@ -13,8 +13,6 @@
#define ATH11K_QMI_WLANFW_TIMEOUT_MS 5000
#define ATH11K_QMI_MAX_BDF_FILE_NAME_SIZE 64
#define ATH11K_QMI_CALDB_ADDRESS 0x4BA00000
-#define ATH11K_QMI_BDF_MAX_SIZE (256 * 1024)
-#define ATH11K_QMI_CALDATA_OFFSET (128 * 1024)
#define ATH11K_QMI_WLANFW_MAX_BUILD_ID_LEN_V01 128
#define ATH11K_QMI_WLFW_SERVICE_ID_V01 0x45
#define ATH11K_QMI_WLFW_SERVICE_VERS_V01 0x01
--
2.25.1
