From: Karthikeyan Periyasamy <periyasa@xxxxxxxxxxxxxx>
Populate the below hw parameters as per the QCN9074 support
1. FFT bin size as two bytes
2. Maximum FFT bin count as 1024
3. Summary report pad size as 16
4. FFT report header length as 24
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01492-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthikeyan Periyasamy <periyasa@xxxxxxxxxxxxxx>
Signed-off-by: Jouni Malinen <jouni@xxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath11k/core.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index 08b2e67c8e19..c97830633f1f 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -201,6 +201,13 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
.vdev_start_delay = false,
.htt_peer_map_v2 = true,
.tcl_0_only = false,
+ .spectral = {
+ .fft_sz = 2,
+ .fft_pad_sz = 0,
+ .summary_pad_sz = 16,
+ .fft_hdr_len = 24,
+ .max_fft_bins = 1024,
+ },
.interface_modes = BIT(NL80211_IFTYPE_STATION) |
BIT(NL80211_IFTYPE_AP) |
BIT(NL80211_IFTYPE_MESH_POINT),
--
2.25.1
