From: Sean Wang <sean.wang@xxxxxxxxxxxx>
>> From: Sean Wang <sean.wang@xxxxxxxxxxxx>
>>
>> ieee80211_disconnect is only called for the staton mode.
>>
>> [ 714.050429] WARNING: CPU: 1 PID: 382 at net/mac80211/mlme.c:2787
>> ieee80211_disconnect+0x108/0x118 [mac80211] [ 714.116704] Hardware
>> name: MediaTek Asurada rev1 board (DT) [ 714.122303] Workqueue: mt76
>> mt7921_mac_reset_work [mt7921e] [ 714.127877] pstate: 20c00009 (nzCv
>> daif +PAN +UAO) [ 714.132761] pc : ieee80211_disconnect+0x108/0x118
>> [mac80211] [ 714.138430] lr : mt7921_vif_connect_iter+0x28/0x54
>> [mt7921e] [ 714.144083] sp : ffffffc0107cbbd0 [ 714.147394] x29:
>> ffffffc0107cbbd0 x28: ffffffb26c9cb928 [ 714.152706] x27:
>> ffffffb26c9cbd98 x26: 0000000000000000 [ 714.158017] x25:
>> 0000000000000003 x24: ffffffb26c9c9c38 [ 714.163328] x23:
>> ffffffb26c9c9c38 x22: ffffffb26c9c8860 [ 714.168639] x21:
>> ffffffb23b940000 x20: ffffffb26c9c8860 [ 714.173950] x19:
>> 0000000000000001 x18: 000000000000b67e [ 714.179261] x17:
>> 00000000064dd409 x16: ffffffd739cb28f0 [ 714.184571] x15:
>> 0000000000000000 x14: 0000000000000227 [ 714.189881] x13:
>> 0000000000000400 x12: ffffffd73a4eb060 [ 714.195191] x11:
>> 0000000000000000 x10: 0000000000000000 [ 714.200502] x9 :
>> ffffffd703a0a000 x8 : 0000000000000006 [ 714.205812] x7 :
>> 2828282828282828 x6 : ffffffb200440396 [ 714.211122] x5 :
>> 0000000000000000 x4 : 0000000000000004 [ 714.216432] x3 :
>> 0000000000000000 x2 : ffffffb23b940c90 [ 714.221743] x1 :
>> 0000000000000001 x0 : ffffffb23b940c90 [ 714.227054] Call trace:
>> [ 714.229594] ieee80211_disconnect+0x108/0x118 [mac80211] [
>> 714.234913] mt7921_vif_connect_iter+0x28/0x54 [mt7921e] [
>> 714.240313] __iterate_interfaces+0xc4/0xdc [mac80211] [ 714.245541]
>> ieee80211_iterate_interfaces+0x4c/0x68 [mac80211] [ 714.251381]
>> mt7921_mac_reset_work+0x410/0x468 [mt7921e] [ 714.256696]
>> process_one_work+0x208/0x3c8 [ 714.260706] worker_thread+0x23c/0x3e8
>> [ 714.264456] kthread+0x140/0x17c [ 714.267685]
>> ret_from_fork+0x10/0x18
>>
>> Fixes: 0c1ce9884607 ("mt76: mt7921: add wifi reset support")
>> Signed-off-by: Sean Wang <sean.wang@xxxxxxxxxxxx>
>
>I am fine with this patch but I guess you are not using an update tree since
>mt7921 supports just sta mode so far.
>
mt7921 can support monitor mode too.
the kernel warning is reproduced when reset mt7921 running with active monitor mode.
>Regards,
>Lorenzo
>
>> ---
>> drivers/net/wireless/mediatek/mt76/mt7921/mac.c | 3 ++-
>> 1 file changed, 2 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
>> b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
>> index fb4de73df701..0a2df295596a 100644
>> --- a/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
>> +++ b/drivers/net/wireless/mediatek/mt76/mt7921/mac.c
>> @@ -1269,7 +1269,8 @@ mt7921_vif_connect_iter(void *priv, u8 *mac,
>> struct mt7921_vif *mvif = (struct mt7921_vif *)vif->drv_priv;
>> struct mt7921_dev *dev = mvif->phy->dev;
>>
>> - ieee80211_disconnect(vif, true);
>> + if (vif->type == NL80211_IFTYPE_STATION)
>> + ieee80211_disconnect(vif, true);
>>
>> mt76_connac_mcu_uni_add_dev(&dev->mphy, vif, &mvif->sta.wcid, true);
>> mt7921_mcu_set_tx(dev, vif);
>> --
>> 2.25.1
>>
>>
>
