Hallo, I bought a TP-Link TL-WN322G with ZyDas-Chipset. If I try to use it with the zd1211rw driver, the device is recognized, but an accesspoint scan via iwlist wlan1 scan fails with "Network is down". Trying to set up the interface manually using ifconfig wlan1 up fails with "SIOCSIFFLAGS: No such device". The complete dmesg-output from plugging the stick in until the above error message reads as follows: usb 2-2: new high speed USB device using ehci_hcd and address 8 usb 2-2: configuration #1 chosen from 1 choice usb 2-2: reset high speed USB device using ehci_hcd and address 8 phy1: Selected rate control algorithm 'pid' zd1211rw 2-2:1.0: phy1 firmware: requesting zd1211/zd1211b_ub firmware: requesting zd1211/zd1211b_uphr zd1211rw 2-2:1.0: RF MAXIM_NEW_RF 0x8 is not supported After that, the red led of the stick is off and ifconfig wlan1 up or other commands involving the device don't work anymore (they hang until the stick is plugged off). Used kernel is 2.6.26, but I encountered the same errors with a 2.6.22 and 2.6.24 kernel. I hope someone can give me a hint how to get this device to work properly. Thanks in advance, J. Pietron -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
