When chip_id is not supported, the resources will be freed
on path err_unsupported, these resources will also be freed
when calling ath10k_pci_remove(), it will cause double free,
so return -ENODEV when it doesn't support the device with wrong
chip_id.
Fixes: c0c378f9907c ("ath10k: remove target soc ps code")
Fixes: 7505f7c3ec1d ("ath10k: create a chip revision whitelist")
Fixes: f8914a14623a ("ath10k: restore QCA9880-AR1A (v1) detection")
Reported-by: Hulk Robot <hulkci@xxxxxxxxxx>
Signed-off-by: Yang Yingliang <yangyingliang@xxxxxxxxxx>
---
drivers/net/wireless/ath/ath10k/pci.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 463cf3f8f8a5..71878ab35b93 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -3685,8 +3685,10 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
if (bus_params.chip_id != 0xffffffff) {
if (!ath10k_pci_chip_is_supported(pdev->device,
- bus_params.chip_id))
+ bus_params.chip_id)) {
+ ret = -ENODEV;
goto err_unsupported;
+ }
}
}
@@ -3697,11 +3699,15 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
}
bus_params.chip_id = ath10k_pci_soc_read32(ar, SOC_CHIP_ID_ADDRESS);
- if (bus_params.chip_id == 0xffffffff)
+ if (bus_params.chip_id == 0xffffffff) {
+ ret = -ENODEV;
goto err_unsupported;
+ }
- if (!ath10k_pci_chip_is_supported(pdev->device, bus_params.chip_id))
+ if (!ath10k_pci_chip_is_supported(pdev->device, bus_params.chip_id)) {
+ ret = -ENODEV;
goto err_unsupported;
+ }
ret = ath10k_core_register(ar, &bus_params);
if (ret) {
--
2.25.1
