Search Linux Wireless

[PATCH 5/7] rtl8xxxu: fill up txrate info for all chips

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Chris Chiu <chiu@xxxxxxxxxxxxx>

RTL8188CUS/RTL8192CU (gen1) doesn't support rate adaptive report
hence no real txrate info can be retrieved. The vendor driver reports
the highest rate in HT capabilities from AP side.
This commit follows the same way to avoid empty info for txrate.

(cherry picked from commit 831ecaf5e80b1cba26d3606b064020a22268f694)
Signed-off-by: Reto Schneider <reto.schneider@xxxxxxxxxxxxxxxxxx>
---

 .../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 86 ++++++++++++-------
 1 file changed, 57 insertions(+), 29 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 0a04ce00b1fe..0c997c360028 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -4670,6 +4670,35 @@ static void rtl8xxxu_update_txpower(struct rtl8xxxu_priv *priv, int power)
 	priv->fops->set_tx_power(priv, channel, ht40);
 }
 
+static struct ieee80211_rate rtl8xxxu_legacy_ratetable[] = {
+	{.bitrate = 10, .hw_value = 0x00,},
+	{.bitrate = 20, .hw_value = 0x01,},
+	{.bitrate = 55, .hw_value = 0x02,},
+	{.bitrate = 110, .hw_value = 0x03,},
+	{.bitrate = 60, .hw_value = 0x04,},
+	{.bitrate = 90, .hw_value = 0x05,},
+	{.bitrate = 120, .hw_value = 0x06,},
+	{.bitrate = 180, .hw_value = 0x07,},
+	{.bitrate = 240, .hw_value = 0x08,},
+	{.bitrate = 360, .hw_value = 0x09,},
+	{.bitrate = 480, .hw_value = 0x0a,},
+	{.bitrate = 540, .hw_value = 0x0b,},
+};
+
+static void rtl8xxxu_desc_to_mcsrate(u16 rate, u8 *mcs, u8 *nss)
+{
+	if (rate <= DESC_RATE_54M)
+		return;
+
+	if (rate >= DESC_RATE_MCS0 && rate <= DESC_RATE_MCS15) {
+		if (rate < DESC_RATE_MCS8)
+			*nss = 1;
+		else
+			*nss = 2;
+		*mcs = rate - DESC_RATE_MCS0;
+	}
+}
+
 static void
 rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 			  struct ieee80211_bss_conf *bss_conf, u32 changed)
@@ -4677,9 +4706,12 @@ rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 	struct rtl8xxxu_priv *priv = hw->priv;
 	struct device *dev = &priv->udev->dev;
 	struct ieee80211_sta *sta;
+	struct rtl8xxxu_ra_report *rarpt;
 	u32 val32;
 	u8 val8;
 
+	rarpt = &priv->ra_report;
+
 	if (changed & BSS_CHANGED_ASSOC) {
 		dev_dbg(dev, "Changed ASSOC: %i!\n", bss_conf->assoc);
 
@@ -4688,6 +4720,9 @@ rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 		if (bss_conf->assoc) {
 			u32 ramask;
 			int sgi = 0;
+			u8 highest_rate;
+			u8 mcs = 0, nss = 0;
+			u32 bit_rate;
 
 			rcu_read_lock();
 			sta = ieee80211_find_sta(vif, bss_conf->bssid);
@@ -4712,6 +4747,28 @@ rtl8xxxu_bss_info_changed(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 				sgi = 1;
 			rcu_read_unlock();
 
+			highest_rate = fls(ramask) - 1;
+			if (highest_rate < DESC_RATE_MCS0) {
+				rarpt->txrate.legacy =
+					rtl8xxxu_legacy_ratetable[highest_rate].bitrate;
+			} else {
+				rtl8xxxu_desc_to_mcsrate(highest_rate, &mcs, &nss);
+				rarpt->txrate.flags |= RATE_INFO_FLAGS_MCS;
+
+				rarpt->txrate.mcs = mcs;
+				rarpt->txrate.nss = nss;
+
+				if (sgi) {
+					rarpt->txrate.flags |=
+						RATE_INFO_FLAGS_SHORT_GI;
+				}
+
+				rarpt->txrate.bw |= RATE_INFO_BW_20;
+			}
+			bit_rate = cfg80211_calculate_bitrate(&rarpt->txrate);
+			rarpt->bit_rate = bit_rate;
+			rarpt->desc_rate = highest_rate;
+
 			priv->vif = vif;
 			priv->rssi_level = RTL8XXXU_RATR_STA_INIT;
 
@@ -5557,35 +5614,6 @@ void rtl8723bu_handle_bt_info(struct rtl8xxxu_priv *priv)
 	}
 }
 
-static struct ieee80211_rate rtl8xxxu_legacy_ratetable[] = {
-	{.bitrate = 10, .hw_value = 0x00,},
-	{.bitrate = 20, .hw_value = 0x01,},
-	{.bitrate = 55, .hw_value = 0x02,},
-	{.bitrate = 110, .hw_value = 0x03,},
-	{.bitrate = 60, .hw_value = 0x04,},
-	{.bitrate = 90, .hw_value = 0x05,},
-	{.bitrate = 120, .hw_value = 0x06,},
-	{.bitrate = 180, .hw_value = 0x07,},
-	{.bitrate = 240, .hw_value = 0x08,},
-	{.bitrate = 360, .hw_value = 0x09,},
-	{.bitrate = 480, .hw_value = 0x0a,},
-	{.bitrate = 540, .hw_value = 0x0b,},
-};
-
-static void rtl8xxxu_desc_to_mcsrate(u16 rate, u8 *mcs, u8 *nss)
-{
-	if (rate <= DESC_RATE_54M)
-		return;
-
-	if (rate >= DESC_RATE_MCS0 && rate <= DESC_RATE_MCS15) {
-		if (rate < DESC_RATE_MCS8)
-			*nss = 1;
-		else
-			*nss = 2;
-		*mcs = rate - DESC_RATE_MCS0;
-	}
-}
-
 static void rtl8xxxu_c2hcmd_callback(struct work_struct *work)
 {
 	struct rtl8xxxu_priv *priv;
-- 
2.29.2




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux