Hi!
I'm using probably the same device and the same modules here from
Larry's repository. They are working perfectly - much better then any
other existing modules. Absolutely stable and good throughput on even
bad radio conditions.
My device:
04:00.0 0280: 10ec:c821
Subsystem: 1a3b:3041
Flags: bus master, fast devsel, latency 0, IRQ 76
I/O ports at d000 [size=256]
Memory at f7600000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 3
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [70] Express Endpoint, MSI 00
Capabilities: [100] Advanced Error Reporting
Capabilities: [148] Device Serial Number 00-e0-4c-ff-fe-c8-21-01
Capabilities: [158] Latency Tolerance Reporting
Capabilities: [160] L1 PM Substates
Capabilities: [170] Precision Time Measurement
Capabilities: [17c] Vendor Specific Information: ID=0003 Rev=1
Len=054 <?>
Kernel driver in use: rtw_8821ce
Kernel modules: rtw_8821ce
on Linux 5.10.27 / self build
I saw you're using network manager - I'm using just wpa_supplicant
(EAPTLS) - nothing else. Maybe that's the problem?
One more thing: I'm on 2.4 GHz / 40 MHz.
Thanks
Andreas
