In efuse mode, mt7915 only reads efuse values from FW which driver need.
Add a debugfs knob to read addtional efuse values from a specific field,
which is useful in some cases such as checking if rf values in efuse
are properly burned.
An example of usage:
echo 0x400 > efuse_idx
hexdump -C eeprom
Signed-off-by: Shayne Chen <shayne.chen@xxxxxxxxxxxx>
---
.../net/wireless/mediatek/mt76/mt7915/debugfs.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c b/drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c
index 6a8ddee..0526459 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c
@@ -73,6 +73,21 @@ mt7915_radar_trigger(void *data, u64 val)
DEFINE_DEBUGFS_ATTRIBUTE(fops_radar_trigger, NULL,
mt7915_radar_trigger, "%lld\n");
+static int
+mt7915_efuse_idx_set(void *data, u64 val)
+{
+ struct mt7915_dev *dev = data;
+ u8 *eep = dev->mt76.eeprom.data;
+
+ if (eep[val] == 0xff && !dev->flash_mode)
+ mt7915_mcu_get_eeprom(dev, val);
+
+ return 0;
+}
+
+DEFINE_DEBUGFS_ATTRIBUTE(fops_efuse_idx, NULL,
+ mt7915_efuse_idx_set, "0x%llx\n");
+
static int
mt7915_fw_debug_set(void *data, u64 val)
{
@@ -390,6 +405,7 @@ int mt7915_init_debugfs(struct mt7915_dev *dev)
debugfs_create_file("radar_trigger", 0200, dir, dev,
&fops_radar_trigger);
debugfs_create_file("ser_trigger", 0200, dir, dev, &fops_ser_trigger);
+ debugfs_create_file("efuse_idx", 0200, dir, dev, &fops_efuse_idx);
debugfs_create_devm_seqfile(dev->mt76.dev, "temperature", dir,
mt7915_read_temperature);
debugfs_create_devm_seqfile(dev->mt76.dev, "txpower_sku", dir,
--
2.18.0
