From: Ajay Singh <ajay.kathat@xxxxxxxxxxxxx> For SPI bus, sometimes registers read fails after read/write to clockless register so added workaround to issue reset command during wakeup sequence. Signed-off-by: Ajay Singh <ajay.kathat@xxxxxxxxxxxxx> --- drivers/net/wireless/microchip/wilc1000/sdio.c | 1 + drivers/net/wireless/microchip/wilc1000/spi.c | 16 ++++++++++++++++ drivers/net/wireless/microchip/wilc1000/wlan.c | 5 +++++ drivers/net/wireless/microchip/wilc1000/wlan.h | 1 + 4 files changed, 23 insertions(+) diff --git a/drivers/net/wireless/microchip/wilc1000/sdio.c b/drivers/net/wireless/microchip/wilc1000/sdio.c index e14b9fc2c67a..db490f449c27 100644 --- a/drivers/net/wireless/microchip/wilc1000/sdio.c +++ b/drivers/net/wireless/microchip/wilc1000/sdio.c @@ -975,6 +975,7 @@ static const struct wilc_hif_func wilc_hif_sdio = { .hif_sync_ext = wilc_sdio_sync_ext, .enable_interrupt = wilc_sdio_enable_interrupt, .disable_interrupt = wilc_sdio_disable_interrupt, + .hif_reset = wilc_sdio_reset, }; static int wilc_sdio_resume(struct device *dev) diff --git a/drivers/net/wireless/microchip/wilc1000/spi.c b/drivers/net/wireless/microchip/wilc1000/spi.c index 607c8b642865..95228dc2d7e0 100644 --- a/drivers/net/wireless/microchip/wilc1000/spi.c +++ b/drivers/net/wireless/microchip/wilc1000/spi.c @@ -46,6 +46,8 @@ struct wilc_spi { static const struct wilc_hif_func wilc_hif_spi; +static int wilc_spi_reset(struct wilc *wilc); + /******************************************** * * Spi protocol Function @@ -952,6 +954,19 @@ static int wilc_spi_write(struct wilc *wilc, u32 addr, u8 *buf, u32 size) * ********************************************/ +static int wilc_spi_reset(struct wilc *wilc) +{ + struct spi_device *spi = to_spi_device(wilc->dev); + struct wilc_spi *spi_priv = wilc->bus_data; + int result; + + result = wilc_spi_special_cmd(wilc, CMD_RESET); + if (result && !spi_priv->probing_crc) + dev_err(&spi->dev, "Failed cmd reset\n"); + + return result; +} + static int wilc_spi_deinit(struct wilc *wilc) { /* @@ -1169,4 +1184,5 @@ static const struct wilc_hif_func wilc_hif_spi = { .hif_block_tx_ext = wilc_spi_write, .hif_block_rx_ext = wilc_spi_read, .hif_sync_ext = wilc_spi_sync_ext, + .hif_reset = wilc_spi_reset, }; diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.c b/drivers/net/wireless/microchip/wilc1000/wlan.c index 177e42a9a603..9f0bb876975a 100644 --- a/drivers/net/wireless/microchip/wilc1000/wlan.c +++ b/drivers/net/wireless/microchip/wilc1000/wlan.c @@ -669,6 +669,11 @@ void chip_wakeup(struct wilc *wilc) pr_err("Failed to wake-up the chip\n"); return; } + /* Sometimes spi fail to read clock regs after reading + * writing clockless registers + */ + if (wilc->io_type == WILC_HIF_SPI) + wilc->hif_func->hif_reset(wilc); } EXPORT_SYMBOL_GPL(chip_wakeup); diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.h b/drivers/net/wireless/microchip/wilc1000/wlan.h index 285e5d9a2b48..150648b2c872 100644 --- a/drivers/net/wireless/microchip/wilc1000/wlan.h +++ b/drivers/net/wireless/microchip/wilc1000/wlan.h @@ -373,6 +373,7 @@ struct wilc_hif_func { int (*hif_sync_ext)(struct wilc *wilc, int nint); int (*enable_interrupt)(struct wilc *nic); void (*disable_interrupt)(struct wilc *nic); + int (*hif_reset)(struct wilc *wilc); }; #define WILC_MAX_CFG_FRAME_SIZE 1468 -- 2.24.0