Luca Coelho <luca@xxxxxxxxx> wrote: > From: Sara Sharon <sara.sharon@xxxxxxxxx> > > When moving to the new channel, we block TX until we hear the > first beacon. if it is not heard, we proceed to disconnect. > Since TX is blocked (without mac80211 being aware of it) the frame > is stuck, resulting with queue hang. > > Instead, reenable TX before reporting on the connection loss. > As we are on the new channel, there is no problem with that, > even if the original CSA had quiet mode. > > Signed-off-by: Sara Sharon <sara.sharon@xxxxxxxxx> > Signed-off-by: Luca Coelho <luciano.coelho@xxxxxxxxx> 12 patches applied to iwlwifi-next.git, thanks. 89155fd1be13 iwlwifi: mvm: enable TX on new CSA channel before disconnecting 9c1d5a542af4 iwlwifi: pcie: avoid unnecessarily taking spinlock 15067411ad2f iwlwifi: pcie: normally grab NIC access for inflight-hcmd b060bcc81557 iwlwifi: mvm: don't allow CSA if we haven't been fully associated 0c845f9c9584 iwlwifi: pcie: Add support for Bz Family 2d23d815f958 iwlwifi: change step in so-gf struct cb10926a0a13 iwlwifi: change name to AX 211 and 411 family b1d5eb429c8d iwlwifi: add 160Mhz to killer 1550 name 8b06b7eda055 iwlwifi: pcie: clear only FH bits handle in the interrupt 77c07024bd4c iwlwifi: pcie: make cfg vs. trans_cfg more robust 0c5de88265be iwlwifi: mvm: support range request command version 12 1d558311f67a iwlwifi: mvm: responder: support responder config command version 8
