On Thu, Sep 18, 2008 at 12:00 PM, Steven Noonan <steven@xxxxxxxxxxxxxx> wrote: > On Thu, Sep 18, 2008 at 11:42 AM, Luis R. Rodriguez > <lrodriguez@xxxxxxxxxxx> wrote: >> On Thu, Sep 18, 2008 at 11:34 AM, Luis R. Rodriguez >>> irqpoll is a monster of evil and that should make your system crawl to >>> its knees. I would advise instead we work with you fixing the the >>> missed interrupts issue upon rmmod. >> >> Also, please provide the output of >> >> cat /proc/interrupts > > Note that the problem necessitating use of irqpoll in the first place > seems to only happen under certain conditions. I am unsure what these > conditions are. Before 'ath9k: connectivity is lost after Group > rekeying is done', You mean this patch: [PATCH] ath9k: connectivity is lost after Group rekeying is done http://marc.info/?l=linux-wireless&m=122163541519736&w=2 So let me get this straight -- you applied this new patch, and haven't tried disabling irqpoll now? > I had used rmmod/modprobe as my solution to the > issue, which triggered the IRQ issue. Understood, but I also have used this before with ath9k and I got exactly the same results you did -- I just refused to use it again and just try to fix the issues present. ath9k issues tons of interrupts, not sure why irqpoll option would cause latency so bad as the interrupts *are* handled. Not sure *exactly* how irqpoll works but its description mentions using it forces each interrupt handler on the IRQ line to check the interrupt is for it. You have to keep in mind that not only are ath9k interrupts then being sent to the devices on its line but it would seem that all other devices on each line would suffer from the interrupts of the other guys. Why ath9k would be the *only* culprit of causing latency when using irqpoll if the irq line it son is clean? Beats me. > alcarin steven # cat /proc/interrupts > CPU0 CPU1 > 0x0: 63227 0 IO-APIC-edge hpet > 0x8: 1 0 IO-APIC-edge rtc0 > 0x9: 13080 0 IO-APIC-fasteoi acpi > 0xe: 8195 0 IO-APIC-edge ide0 > 0xf: 0 0 IO-APIC-edge ide1 > 0x10: 36 0 IO-APIC-fasteoi uhci_hcd:usb5 > 0x11: 10645 0 IO-APIC-fasteoi ath In this case your 11n Atheros device is on a clean line. > 0x12: 42 0 IO-APIC-fasteoi uhci_hcd:usb4 > 0x17: 919 0 IO-APIC-fasteoi ehci_hcd:usb1, uhci_hcd:usb2 But it was this interrupt line which had an interrupt not handled. I'm not sure why this would happen. Can't we rule out ath9k then since its on a different interrupt line? > 0x13: 32885 0 IO-APIC-fasteoi uhci_hcd:usb3, > ata_piix, ohci1394 > 0x200100: 1 0 PCI-MSI-edge eth0 > 0x16: 223 0 IO-APIC-fasteoi HDA Intel > NMI: 0 0 Non-maskable interrupts > LOC: 78087 95718 Local timer interrupts > RES: 11576 16384 Rescheduling interrupts > CAL: 6862 8889 Function call interrupts > TLB: 54 41 TLB shootdowns > TRM: 0 0 Thermal event interrupts > THR: 0 0 Threshold APIC interrupts > SPU: 0 0 Spurious interrupts > ERR: 0 Can you try to reproduce the irq not handled again? >> >> and also please do not cross post to all these lists, just use >> linux-wireless or ath9k. >> > > Sorry, but in the past I've posted to linux-wireless, ath9k-devel, and > all the maintainers of ath9k and didn't get a single response (except > a 'me too' from a fellow ath9k user). I didn't just want to hear > crickets this time. Patches speak more than words, but yeah sorry, we should have addressed this there. I've personally have just been busy with tackling aggregation. Luis -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
