Search Linux Wireless

[PATCH 1/5] dt-bindings: soc: qcom: wcnss: Add firmware-name property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The WCNSS needs firmware which differs between platforms, and possibly
boards. Add a new property "firmware-name" to allow the DT to specify
the platform/board specific path to this firmware file.

Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
 Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt
index 042a2e4159bd..1382b64e1381 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt
@@ -24,6 +24,13 @@ block and a BT, WiFi and FM radio block, all using SMD as command channels.
 		    "qcom,riva",
 		    "qcom,pronto"
 
+- firmware-name:
+	Usage: optional
+	Value type: <string>
+	Definition: specifies the relative firmware image path for the WLAN NV
+		    blob. Defaults to "wlan/prima/WCNSS_qcom_wlan_nv.bin" if
+		    not specified.
+
 = SUBNODES
 The subnodes of the wcnss node are optional and describe the individual blocks in
 the WCNSS.
-- 
2.29.2




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux