Hi, I am trying to get SAE offload support on a BCM4345 (raspberry pi B+). >From what I can tell it appears the Cypress firmware is not enabling the right bits. It looks like the brcmfmac driver has all the code to enable the extended feature. Here is what I have done so far: Cloned raspi linux kernel v5.4 Downloaded latest Cypress firmware: https://community.cypress.com/t5/Resource-Library/Cypress-Linux-WiFi-Driver-Release-FMAC-2020-09-25/ta-p/251089 Applied the patches from above. Note not *all* the patches applied (could be due to already upstreamed), but most did. I did have to fix an include issue so brcmfmac/cfg80211.c could reference LINUX_CODE_VERSION/LINUX_VERSION. Built new kernel/installed etc. After that everything built, and I do see SAE offload source code which sets the ext feature if BRCMF_FEAT_SAE is enabled. I see my new kernel here: Linux raspberrypi 5.4.83-v7+ #2 SMP Thu Mar 4 10:54:16 PST 2021 armv7l GNU/Linux and dmesg shows the new firmware loading: [ 7.315275] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 7.337608] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 7.338104] usbcore: registered new interface driver brcmfmac [ 7.606184] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [ 7.616186] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 23 2020 02:19:54 version 7.45.206 (r725000 CY) FWID 01- 88ee44ea Yet iw does not have SAE_OFFLOAD set as an extended feature: Supported extended features: * [ 4WAY_HANDSHAKE_STA_PSK ]: 4-way handshake with PSK in station mode * [ 4WAY_HANDSHAKE_STA_1X ]: 4-way handshake with 802.1X in station mode * [ DFS_OFFLOAD ]: DFS offload Thanks, James
