Search Linux Wireless

Re: [PATCH 3/3] PCI: Convert rtw88 power cycle quirk to shutdown quirk

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Feb 27, 2021 at 2:17 AM Bjorn Helgaas <helgaas@xxxxxxxxxx> wrote:
>
> On Fri, Feb 26, 2021 at 02:31:31PM +0100, Heiner Kallweit wrote:
> > On 26.02.2021 13:18, Kai-Heng Feng wrote:
> > > On Fri, Feb 26, 2021 at 8:10 PM Heiner Kallweit <hkallweit1@xxxxxxxxx> wrote:
> > >>
> > >> On 26.02.2021 08:12, Kalle Valo wrote:
> > >>> Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx> writes:
> > >>>
> > >>>> Now we have a generic D3 shutdown quirk, so convert the original
> > >>>> approach to a PCI quirk.
> > >>>>
> > >>>> Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
> > >>>> ---
> > >>>>  drivers/net/wireless/realtek/rtw88/pci.c | 2 --
> > >>>>  drivers/pci/quirks.c                     | 6 ++++++
> > >>>>  2 files changed, 6 insertions(+), 2 deletions(-)
> > >>>
> > >>> It would have been nice to CC linux-wireless also on patches 1-2. I only
> > >>> saw patch 3 and had to search the rest of patches from lkml.
> > >>>
> > >>> I assume this goes via the PCI tree so:
> > >>>
> > >>> Acked-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
> > >>
> > >> To me it looks odd to (mis-)use the quirk mechanism to set a device
> > >> to D3cold on shutdown. As I see it the quirk mechanism is used to work
> > >> around certain device misbehavior. And setting a device to a D3
> > >> state on shutdown is a normal activity, and the shutdown() callback
> > >> seems to be a good place for it.
> > >> I miss an explanation what the actual benefit of the change is.
> > >
> > > To make putting device to D3 more generic, as there are more than one
> > > device need the quirk.
> > >
> > > Here's the discussion:
> > > https://lore.kernel.org/linux-usb/00de6927-3fa6-a9a3-2d65-2b4d4e8f0012@xxxxxxxxxxxxxxx/
> > >
> >
> > Thanks for the link. For the AMD USB use case I don't have a strong opinion,
> > what's considered the better option may be a question of personal taste.
> > For rtw88 however I'd still consider it over-engineering to replace a simple
> > call to pci_set_power_state() with a PCI quirk.
> > I may be biased here because I find it sometimes bothering if I want to
> > look up how a device is handled and in addition to checking the respective
> > driver I also have to grep through quirks.c whether there's any special
> > handling.
>
> I haven't looked at these patches carefully, but in general, I agree
> that quirks should be used to work around hardware defects in the
> device.  If the device behaves correctly per spec, we should use a
> different mechanism so the code remains generic and all devices get
> the benefit.
>
> If we do add quirks, the commit log should explain what the device
> defect is.

So maybe it's reasonable to put all PCI devices to D3 at shutdown?

Kai-Heng

>
> Bjorn



[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux