From: Sean Wang <sean.wang@xxxxxxxxxxxx>
Should use 0x10000 as the base to operate PCIe interrupt according
to the vendor reference driver.
Fixes: ffa1bf97425b ("mt76: mt7921: introduce PM support")
Co-developed-by: YN Chen <YN.Chen@xxxxxxxxxxxx>
Signed-off-by: YN Chen <YN.Chen@xxxxxxxxxxxx>
Signed-off-by: Sean Wang <sean.wang@xxxxxxxxxxxx>
---
drivers/net/wireless/mediatek/mt76/mt7921/pci.c | 4 ++--
drivers/net/wireless/mediatek/mt76/mt7921/regs.h | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/pci.c b/drivers/net/wireless/mediatek/mt76/mt7921/pci.c
index 3e430c04c97e..def8b7816609 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/pci.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/pci.c
@@ -137,7 +137,7 @@ static int mt7921_pci_probe(struct pci_dev *pdev,
mt76_wr(dev, MT_WFDMA0_HOST_INT_ENA, 0);
- mt7921_l1_wr(dev, MT_PCIE_MAC_INT_ENABLE, 0xff);
+ mt76_wr(dev, MT_PCIE_MAC_INT_ENABLE, 0xff);
ret = devm_request_irq(mdev->dev, pdev->irq, mt7921_irq_handler,
IRQF_SHARED, KBUILD_MODNAME, dev);
@@ -248,7 +248,7 @@ static int mt7921_pci_resume(struct pci_dev *pdev)
return 0;
/* enable interrupt */
- mt7921_l1_wr(dev, MT_PCIE_MAC_INT_ENABLE, 0xff);
+ mt76_wr(dev, MT_PCIE_MAC_INT_ENABLE, 0xff);
mt7921_irq_enable(dev, MT_INT_RX_DONE_ALL | MT_INT_TX_DONE_ALL |
MT_INT_MCU_CMD);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/regs.h b/drivers/net/wireless/mediatek/mt76/mt7921/regs.h
index 419add751980..c4bd31cc81cb 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/regs.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/regs.h
@@ -391,7 +391,7 @@
#define MT_HW_CHIPID 0x70010200
#define MT_HW_REV 0x70010204
-#define MT_PCIE_MAC_BASE 0x74030000
+#define MT_PCIE_MAC_BASE 0x10000
#define MT_PCIE_MAC(ofs) (MT_PCIE_MAC_BASE + (ofs))
#define MT_PCIE_MAC_INT_ENABLE MT_PCIE_MAC(0x188)
--
2.25.1
