Commit c134d1f8c436 ("ath11k: Handle errors if peer creation fails") completely
broke AP mode on QCA6390:
kernel: [ 151.230734] ath11k_pci 0000:06:00.0: failed to create peer after vdev start delay: -22
wpa_supplicant[2307]: Failed to set beacon parameters
wpa_supplicant[2307]: Interface initialization failed
wpa_supplicant[2307]: wlan0: interface state UNINITIALIZED->DISABLED
wpa_supplicant[2307]: wlan0: AP-DISABLED
wpa_supplicant[2307]: wlan0: Unable to setup interface.
wpa_supplicant[2307]: Failed to initialize AP interface
This was because commit c134d1f8c436 ("ath11k: Handle errors if peer creation
fails") added error handling for ath11k_peer_create(), which had been failing
all along but was unnoticed due to the missing error handling. The actual bug
was introduced already in commit aa44b2f3ecd4 ("ath11k: start vdev if a bss peer is
already created").
ath11k_peer_create() was failing because for AP mode the peer is created
already earlier op_add_interface() and we should skip creation here, but the
check for modes was wrong. Fixing that makes AP mode work again.
This shouldn't affect IPQ8074 nor QCN9074 as they have hw_params.vdev_start_delay disabled.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Fixes: c134d1f8c436 ("ath11k: Handle errors if peer creation fails")
Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/ath11k/mac.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 335d49af7dd5..76f3343183fe 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -5450,8 +5450,8 @@ ath11k_mac_op_assign_vif_chanctx(struct ieee80211_hw *hw,
}
if (ab->hw_params.vdev_start_delay &&
- (arvif->vdev_type == WMI_VDEV_TYPE_AP ||
- arvif->vdev_type == WMI_VDEV_TYPE_MONITOR)) {
+ arvif->vdev_type != WMI_VDEV_TYPE_AP &&
+ arvif->vdev_type != WMI_VDEV_TYPE_MONITOR) {
param.vdev_id = arvif->vdev_id;
param.peer_type = WMI_PEER_TYPE_DEFAULT;
param.peer_addr = ar->mac_addr;
--
2.7.4
