Search Linux Wireless

Re: brcmfmac and unaligned sdio access on Khadas VIM3L

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/02/2021 09:45, Marek Szyprowski wrote:
> Hi Neil,
> 
> On 10.02.2021 09:17, Neil Armstrong wrote:
>> On 09/02/2021 13:48, Marek Szyprowski wrote:
>>> I've noticed that the Broadcom Wifi chip performs unaligned SDIO access
>>> during the station scan on Khadas VIM3l board. This issue went unnoticed
>>> so far, because there was a workaround in the meson MMC driver, which
>>> has been recently disabled by commit e085b51c74cc ("mmc: meson-gx: check
>>> for scatterlist size alignment in block mode") from current linux-next.
>>>
>>> I can easily reproduce this issue with the following commands:
>>>
>>> # dmesg | grep brcm
>>> [   11.659351] Bluetooth: hci0: BCM4359C0 'brcm/BCM4359C0.hcd' Patch
>>> [   13.079767] brcmfmac: brcmf_fw_alloc_request: using
>>> brcm/brcmfmac4359-sdio for chip BCM4359/9
>>> [   13.527363] brcmfmac: brcmf_fw_alloc_request: using
>>> brcm/brcmfmac4359-sdio for chip BCM4359/9
>>> [   13.601269] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available
>>> (err=-11), device may have limited channels available
>>> [   13.619414] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4359/9 wl0:
>>> Mar  6 2017 10:16:06 version 9.87.51.7 (r686312) FWID 01-4dcc75d9
>>> # ifconfig wlan0 up
>>> [  208.052058] ieee80211 phy0: brcmf_dongle_roam: WLC_SET_ROAM_TRIGGER
>>> error (-52)
>>> # iw wlan0 scan >/dev/null
>>> [  218.148345] ------------[ cut here ]------------
>>> [  218.148501] unaligned sg len 504 blksize 256
>>> [  218.153712] WARNING: CPU: 1 PID: 75 at
>>> drivers/mmc/host/meson-gx-mmc.c:251
>>> meson_mmc_get_transfer_mode.isra.10+0xf8/0x130
>>> [  218.162616] Modules linked in: ipv6 brcmfmac brcmutil cfg80211
>>> dw_hdmi_cec dw_hdmi_i2s_audio hci_uart btqca btbcm bluetooth
>>> ecdh_generic ecc crct10dif_ce rfkill panfrost
>>> snd_soc_meson_axg_sound_card snd_soc_meson_card_utils gpu_sched
>>> meson_gxbb_wdt rtc_hym8563 pwm_meson meson_gxl rtc_meson_vrtc rc_khadas
>>> meson_ir reset_meson_audio_arb realtek snd_soc_meson_g12a_tohdmitx
>>> snd_soc_meson_codec_glue snd_soc_meson_axg_tdmout
>>> snd_soc_meson_axg_frddr snd_soc_meson_axg_fifo axg_audio sclk_div
>>> clk_phase mdio_mux_meson_g12a meson_dw_hdmi meson_drm meson_rng
>>> dwmac_generic snd_soc_meson_axg_tdm_interface meson_canvas rng_core
>>> dw_hdmi snd_soc_meson_axg_tdm_formatter dwmac_meson8b stmmac_platform
>>> stmmac display_connector adc_keys pcs_xpcs nvmem_meson_efuse
>>> [  218.228329] CPU: 1 PID: 75 Comm: kworker/u8:2 Not tainted
>>> 5.11.0-rc6-next-20210208 #2492
>>> [  218.236343] Hardware name: Khadas VIM3L (DT)
>>> [  218.240579] Workqueue: brcmf_wq/mmc2:0001:1 brcmf_sdio_dataworker
>>> [brcmfmac]
>>> [  218.247559] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--)
>>> [  218.253506] pc : meson_mmc_get_transfer_mode.isra.10+0xf8/0x130
>>> [  218.259372] lr : meson_mmc_get_transfer_mode.isra.10+0xf8/0x130
>>> [  218.265237] sp : ffff80001327b870
>>> [  218.268514] x29: ffff80001327b870 x28: 0000000000000003
>>> [  218.273776] x27: 0000000000000218 x26: 0000000000000600
>>> [  218.279036] x25: ffff000003a17678 x24: 0000000000000000
>>> [  218.284296] x23: ffff8000121cfae8 x22: ffff800011b54000
>>> [  218.289559] x21: ffff80001327bb18 x20: ffff00000277d000
>>> [  218.294819] x19: ffff80001327ba40 x18: 00000002faf07f80
>>> [  218.300081] x17: 0000000000004000 x16: 0000000000000000
>>> [  218.305341] x15: 0000000000000380 x14: 0000000000000000
>>> [  218.310603] x13: 0000000000000080 x12: 0000000000000000
>>> [  218.315865] x11: 0000000000000000 x10: 0000000000001370
>>> [  218.321125] x9 : ffff00006f995258 x8 : 000000009e0e7ca7
>>> [  218.326387] x7 : ffff80001327b4a0 x6 : 0000000000000001
>>> [  218.331648] x5 : 0000000000000001 x4 : 0000000000000000
>>> [  218.336912] x3 : 0000000000000002 x2 : ffff8000121f4768
>>> [  218.342171] x1 : 42fe1bd05e5eaa00 x0 : 0000000000000000
>>> [  218.347435] Call trace:
>>> [  218.349854]  meson_mmc_get_transfer_mode.isra.10+0xf8/0x130
>>> [  218.355368]  meson_mmc_request+0x74/0xb0
>>> [  218.359250]  __mmc_start_request+0xa4/0x2b0
>>> [  218.363390]  mmc_start_request+0x80/0xa8
>>> [  218.367272]  mmc_wait_for_req+0x68/0xd8
>>> [  218.371066]  mmc_submit_one.isra.17+0x78/0x148 [brcmfmac]
>>> [  218.376416]  brcmf_sdiod_sglist_rw+0x324/0x4a8 [brcmfmac]
>>> [  218.381762]  brcmf_sdiod_recv_chain+0x70/0x140 [brcmfmac]
>>> [  218.387110]  brcmf_sdio_dataworker+0x614/0x17d0 [brcmfmac]
>>> [  218.392545]  process_one_work+0x2a8/0x728
>>> [  218.396510]  worker_thread+0x48/0x460
>>> [  218.400132]  kthread+0x134/0x160
>>> [  218.403323]  ret_from_fork+0x10/0x18
>>> [  218.406862] irq event stamp: 15834
>>> [  218.410222] hardirqs last  enabled at (15833): [<ffff800010f95804>]
>>> _raw_spin_unlock_irq+0x3c/0x80
>>> [  218.419107] hardirqs last disabled at (15834): [<ffff800010f895ac>]
>>> el1_dbg+0x24/0x50
>>> [  218.426869] softirqs last  enabled at (15828): [<ffff800010010508>]
>>> _stext+0x508/0x638
>>> [  218.434717] softirqs last disabled at (15823): [<ffff8000100952ec>]
>>> irq_exit+0x19c/0x1a8
>>> [  218.442739] ---[ end trace dfc38bb4458b4c37 ]---
>>> #
>>>
>>> Surprisingly the same commands executed on the Khadas VIM3 board with
>>> the same kernel don't trigger the warning.
>> This may be because the VIM3 (G12A & G12B) has a broken SDIO controller using
>> an internal SRAM as bounce buffer instead of the scatter/gather DMA, cf amlogic,dram-access-quirk.
> Good to know, this explains why it works without an issue on VIM3.
>>> Let me know if I can help debugging this issue.
>> Simply remove the WARN_ONCE()...
> 
> Well, that WARN is not a big issue for me. I just wanted to help fixing 
> the real issue. If I understand right, the brcmfmac driver queues 
> incorrectly prepared sd list for the given transfer mode, what should be 
> fixed there.

I think the issue comes from brcmfmac that should not provide unaligned data,
but I think it's a global issue where these kind of details aren't specified/enforced.

> 
> On the other hand, if this is just a limitation of the meson mmc 
> controller on SM1/VIM3l, then imho there should not be a WARN there and 
> maybe the mentioned 'amlogic,dram-access-quirk' could be used to fix the 
> issue on VIM3l too. I've checked and it indeed 'fixes' the issue on that 
> board.

This fix severely limits the performance so it's not a good fix here,
the only fix I see here is to remove the WARN because the fact is that the DMA cannot handle
unaligned data, and the SDIO device drivers should be fixed in order to achieve max
performance on SDIO host drivers with DMA (it's usual to not support unaligned data
when dealing with a DMA).

Neil

> 
> Best regards
> 




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux