On Tue, Feb 2, 2021 at 3:02 PM Larry Finger <Larry.Finger@xxxxxxxxxxxx> wrote: > > On 2/2/21 12:29 AM, Kalle Valo wrote: > > Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx> writes: > > > >> On Wed, Aug 5, 2020 at 7:24 PM Kai-Heng Feng > >> <kai.heng.feng@xxxxxxxxxxxxx> wrote: > >>> > >>> Hi Tony, > >>> > >>>> On Aug 5, 2020, at 19:18, Tony Chuang <yhchuang@xxxxxxxxxxx> wrote: > >>>> > >>>>> 8821CE with RFE 2 isn't supported: > >>>>> [ 12.404834] rtw_8821ce 0000:02:00.0: rfe 2 isn't supported > >>>>> [ 12.404937] rtw_8821ce 0000:02:00.0: failed to setup chip efuse info > >>>>> [ 12.404939] rtw_8821ce 0000:02:00.0: failed to setup chip information > >>>>> > >>>> > >>>> NACK > >>>> > >>>> The RFE type 2 should be working with some additional fixes. > >>>> Did you tested connecting to AP with BT paired? > >>> > >>> No, I only tested WiFi. > >>> > >>>> The antenna configuration is different with RFE type 0. > >>>> I will ask someone else to fix them. > >>>> Then the RFE type 2 modules can be supported. > >>> > >>> Good to know that, I'll be patient and wait for a real fix. > >> > >> It's been quite some time, is support for RFE type 2 ready now? > > > > It looks like this patch should add it: > > > > https://patchwork.kernel.org/project/linux-wireless/patch/20210202055012.8296-4-pkshih@xxxxxxxxxxx/ > > > New firmware (rtw8821c_fw.bin) is also needed. That is available at > https://github.com/lwfinger/rtw88.git. Thanks. RFE2 works with the new firmware. Kai-Heng > > Larry >
