Search Linux Wireless

Re: [PATCH v3] ath11k: fix rmmod failure if qmi sequence fails

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Anilkumar Kolli <akolli@xxxxxxxxxxxxxx> wrote:

> QMI sequence fails if caldata file is not available.
> It is observed that 'rmmod ath11k' fails if qmi message fails.
> With this patch rmmod/insmod is working.
> 
> Logs:
> Direct firmware load for IPQ8074/caldata.bin failed with error -2
> Falling back to user helper
> qmi failed to load CAL: IPQ8074/caldata.bin
> qmi failed to load board data file:-11
> 
> Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-00009-QCAHKSWPL_SILICONZ-1
> Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01699-QCAHSTSWPLZ_V2_TO_X86-1
> 
> Signed-off-by: Anilkumar Kolli <akolli@xxxxxxxxxxxxxx>
> Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx>

Patch applied to ath-next branch of ath.git, thanks.

61a57e51e46e ath11k: fix rmmod failure if qmi sequence fails

-- 
https://patchwork.kernel.org/project/linux-wireless/patch/1606916215-24643-1-git-send-email-akolli@xxxxxxxxxxxxxx/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux