From: Johannes Berg <johannes.berg@xxxxxxxxx> For triggering an NMI in the firmware, we should only set BIT(24) in the corresponding register, not the entire mask that's usable by the driver. This currently doesn't matter because the firmware only enables BIT(24), but we'll start using BIT(25) for other purposes with an upcoming API change. Signed-off-by: Johannes Berg <johannes.berg@xxxxxxxxx> Signed-off-by: Luca Coelho <luciano.coelho@xxxxxxxxx> --- drivers/net/wireless/intel/iwlwifi/iwl-io.c | 2 +- drivers/net/wireless/intel/iwlwifi/iwl-prph.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-io.c b/drivers/net/wireless/intel/iwlwifi/iwl-io.c index 2139f0b8f2bb..b24160fe73d3 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-io.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-io.c @@ -279,7 +279,7 @@ void iwl_force_nmi(struct iwl_trans *trans) DEVICE_SET_NMI_VAL_DRV); else if (trans->trans_cfg->device_family < IWL_DEVICE_FAMILY_AX210) iwl_write_umac_prph(trans, UREG_NIC_SET_NMI_DRIVER, - UREG_NIC_SET_NMI_DRIVER_NMI_FROM_DRIVER_MSK); + UREG_NIC_SET_NMI_DRIVER_NMI_FROM_DRIVER); else iwl_write_umac_prph(trans, UREG_DOORBELL_TO_ISR6, UREG_DOORBELL_TO_ISR6_NMI_BIT); diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-prph.h b/drivers/net/wireless/intel/iwlwifi/iwl-prph.h index 6c44a49640be..1a1628550cce 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-prph.h +++ b/drivers/net/wireless/intel/iwlwifi/iwl-prph.h @@ -109,7 +109,7 @@ #define DEVICE_SET_NMI_VAL_DRV BIT(7) /* Device NMI register and value for 9000 family and above hw's */ #define UREG_NIC_SET_NMI_DRIVER 0x00a05c10 -#define UREG_NIC_SET_NMI_DRIVER_NMI_FROM_DRIVER_MSK 0xff000000 +#define UREG_NIC_SET_NMI_DRIVER_NMI_FROM_DRIVER BIT(24) /* Shared registers (0x0..0x3ff, via target indirect or periphery */ #define SHR_BASE 0x00a10000 -- 2.29.2
