On Wed, Nov 11, 2020 at 8:45 PM Kalle Valo <kvalo@xxxxxxxxxxxxxx> wrote: > > (please don't top post, makes it harder to read emails) > > wi nk <wink@xxxxxxxxxxx> writes: > > > Ok with 7fef431be9c9 reverted, it doesn't seem to change the initialization any: > > > > [ 7.961867] ath11k_pci 0000:55:00.0: WARNING: ath11k PCI support is > > experimental! > > [ 7.961913] ath11k_pci 0000:55:00.0: BAR 0: assigned [mem > > 0x8e300000-0x8e3fffff 64bit] > > [ 7.961930] ath11k_pci 0000:55:00.0: enabling device (0000 -> 0002) > > [ 7.962009] ath11k_pci 0000:55:00.0: MSI vectors: 1 > > [ 8.461553] ath11k_pci 0000:55:00.0: Respond mem req failed, > > result: 1, err: 48 > > [ 8.461556] ath11k_pci 0000:55:00.0: qmi failed to respond fw mem req:-22 > > I also see this -22 error (see my logs in [1]), even when the firmware > reboots normally. Do you see anything after these messages? > > The problem which reverting 7fef431be9c9 helps has these errors: > > ath11k_pci 0000:06:00.0: qmi failed memory request, err = -110 > ath11k_pci 0000:06:00.0: qmi failed to respond fw mem req:-110 > > [1] http://lists.infradead.org/pipermail/ath11k/2020-November/000641.html > > > and just for thoroughness, here are my firmware file checksums (sha256): > > > > 9cc48d1dce819ead4112c6a8051c51e4d75e2b11f99ba9d8738cf8108967b70e amss.bin > > 5081930c3b207f8ed82ff250f9b90fb77e87b2a92c3cf80ad020a58dea0bc5b7 board.bin > > 596482f780d21645f72a48acd9aed6c6fc8cf2d039ac31552a19800674d253cc m3.bin > > But these do not look same. I have: > > a101dc90f8e876f39383b60c9da64ec4 /lib/firmware/ath11k/QCA6390/hw2.0/amss.bin > 4c0781f659d2b7d6bef10a2e3d457728 /lib/firmware/ath11k/QCA6390/hw2.0/board-2.bin > d4c912a3501a3694a3f460d13de06d28 /lib/firmware/ath11k/QCA6390/hw2.0/m3.bin > > Download them like this: > > wget https://github.com/kvalo/ath11k-firmware/raw/master/QCA6390/hw2.0/1.0.1/WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1/amss.bin > > wget https://github.com/kvalo/ath11k-firmware/raw/master/QCA6390/hw2.0/1.0.1/WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1/m3.bin > > wget https://github.com/kvalo/ath11k-firmware/raw/master/QCA6390/hw2.0/board-2.bin > > -- > https://patchwork.kernel.org/project/linux-wireless/list/ > > https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches Sorry for the top posting, web email has ruined my mailing list etiquette. It seems having the correct firmware in place has caused some forward movement. I now see this: [ 8.513210] ath11k_pci 0000:55:00.0: WARNING: ath11k PCI support is experimental! [ 8.513251] ath11k_pci 0000:55:00.0: BAR 0: assigned [mem 0x8e300000-0x8e3fffff 64bit] [ 8.513269] ath11k_pci 0000:55:00.0: enabling device (0000 -> 0002) [ 8.513348] ath11k_pci 0000:55:00.0: MSI vectors: 1 [ 8.789499] ath11k_pci 0000:55:00.0: Respond mem req failed, result: 1, err: 0 [ 8.789500] ath11k_pci 0000:55:00.0: qmi failed to respond fw mem req:-22 [ 8.794236] ath11k_pci 0000:55:00.0: req mem_seg[0] 0x28100000 524288 1 [ 8.794237] ath11k_pci 0000:55:00.0: req mem_seg[1] 0x28180000 524288 1 [ 8.794238] ath11k_pci 0000:55:00.0: req mem_seg[2] 0x28200000 524288 1 [ 8.794238] ath11k_pci 0000:55:00.0: req mem_seg[3] 0x28280000 294912 1 [ 8.794239] ath11k_pci 0000:55:00.0: req mem_seg[4] 0x28300000 524288 1 [ 8.794239] ath11k_pci 0000:55:00.0: req mem_seg[5] 0x28380000 524288 1 [ 8.794240] ath11k_pci 0000:55:00.0: req mem_seg[6] 0x27c00000 458752 1 [ 8.794240] ath11k_pci 0000:55:00.0: req mem_seg[7] 0x27c80000 131072 1 [ 8.794240] ath11k_pci 0000:55:00.0: req mem_seg[8] 0x27d00000 524288 4 [ 8.794241] ath11k_pci 0000:55:00.0: req mem_seg[9] 0x27d80000 360448 4 [ 8.794241] ath11k_pci 0000:55:00.0: req mem_seg[10] 0x28578000 16384 1 [ 8.807053] ath11k_pci 0000:55:00.0: chip_id 0x0 chip_family 0xb board_id 0xff soc_id 0xffffffff [ 8.807054] ath11k_pci 0000:55:00.0: fw_version 0x101c06cc fw_build_timestamp 2020-06-24 19:50 fw_build_id [ 8.910984] ath11k_pci 0000:55:00.0: Unknown eventid: 0x16005 [ 9.446566] ath11k_pci 0000:55:00.0 wlp85s0: renamed from wlan0 [ 11.296620] ath11k_pci 0000:55:00.0: Unknown eventid: 0x1d00a [ 22.088028] ath11k_pci 0000:55:00.0: wmi command 12290 timeout [ 22.088030] ath11k_pci 0000:55:00.0: failed to send WMI_STOP_SCAN_CMDID [ 22.088031] ath11k_pci 0000:55:00.0: failed to stop wmi scan: -11 [ 22.088032] ath11k_pci 0000:55:00.0: failed to stop scan: -11 [ 22.088033] ath11k_pci 0000:55:00.0: failed to start hw scan: -110 [ 28.232066] ath11k_pci 0000:55:00.0: wmi command 12289 timeout [ 28.232069] ath11k_pci 0000:55:00.0: failed to send WMI_START_SCAN_CMDID [ 28.232073] ath11k_pci 0000:55:00.0: failed to start hw scan: -11 [ 38.216054] ath11k_pci 0000:55:00.0: wmi command 12289 timeout [ 38.216057] ath11k_pci 0000:55:00.0: failed to send WMI_START_SCAN_CMDID [ 38.216061] ath11k_pci 0000:55:00.0: failed to start hw scan: -11 [ 51.783961] ath11k_pci 0000:55:00.0: wmi command 12289 timeout [ 51.783965] ath11k_pci 0000:55:00.0: failed to send WMI_START_SCAN_CMDID [ 51.783970] ath11k_pci 0000:55:00.0: failed to start hw scan: -11 [ 71.695627] ath11k_pci 0000:55:00.0: wmi command 12289 timeout [ 71.695629] ath11k_pci 0000:55:00.0: failed to send WMI_START_SCAN_CMDID [ 71.695630] ath11k_pci 0000:55:00.0: failed to start hw scan: -11 [ 100.864905] ath11k_pci 0000:55:00.0: wmi command 12289 timeout [ 100.864909] ath11k_pci 0000:55:00.0: failed to send WMI_START_SCAN_CMDID [ 100.864913] ath11k_pci 0000:55:00.0: failed to start hw scan: -11 [ 107.306896] mhi 0000:55:00.0: Device failed to exit MHI Reset state [ 143.868561] ath11k_pci 0000:55:00.0: wmi command 12289 timeout [ 143.868564] ath11k_pci 0000:55:00.0: failed to send WMI_START_SCAN_CMDID [ 143.868566] ath11k_pci 0000:55:00.0: failed to start hw scan: -11 [ 199.464250] mhi 0000:55:00.0: Device failed to exit MHI Reset state <snip> Occasionally my kernel is panic'ing at random spots (this is probably related to the other patch I guess), but I do have a bit of an adapter now ,ifconfig shows it. I don't seem to be able to find any networks with it however.
