Set the rx_filter in ath11k_mac_config_mon_status_default(),
only when the rx_filter value exists in ath11k_debug_rx_filter().
Without this change, rx_filter gets set to 0 and peer rssi stats
aren't updating properly from firmware.
Tested-on: IPQ8074 WLAN.HK.2.1.0.1-01230-QCAHKSWPL_SILICONZ-4
Fixes: ec48d28ba291 ("ath11k: Fix rx_filter flags setting for per peer rx_stats")
Signed-off-by: Maharaja Kennadyrajan <mkenna@xxxxxxxxxxxxxx>
---
V2: Added the "Fixes" tag in the commit message.
drivers/net/wireless/ath/ath11k/mac.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 591dceb..cad4402 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -4144,7 +4144,8 @@ static int ath11k_mac_config_mon_status_default(struct ath11k *ar, bool enable)
if (enable) {
tlv_filter = ath11k_mac_mon_status_filter_default;
- tlv_filter.rx_filter = ath11k_debugfs_rx_filter(ar);
+ if (ath11k_debugfs_rx_filter(ar))
+ tlv_filter.rx_filter = ath11k_debugfs_rx_filter(ar);
}
for (i = 0; i < ab->hw_params.num_rxmda_per_pdev; i++) {
--
2.7.4
