STS Beamformee capability sent from firmware is overwritten as num_tx_chains - 1. When num_tx_chains is 2, then STS is set to invalid value 1. Since STS is not limited by number of TX chain, not overwriting the capability received from firmware. Tested on: IPQ6018 WLAN.HK.2.4.0.1-00303-QCAHKSWPL_SILICONZ-1 Signed-off-by: Ramya Gnanasekar <rgnanase@xxxxxxxxxxxxxx> --- drivers/net/wireless/ath/ath11k/mac.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c index 7f8dd47..787b052 100644 --- a/drivers/net/wireless/ath/ath11k/mac.c +++ b/drivers/net/wireless/ath/ath11k/mac.c @@ -3729,11 +3729,6 @@ static int ath11k_mac_copy_he_cap(struct ath11k *ar, he_cap_elem->mac_cap_info[1] &= IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_MASK; - he_cap_elem->phy_cap_info[4] &= - ~IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_MASK; - he_cap_elem->phy_cap_info[4] &= - ~IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_MASK; - he_cap_elem->phy_cap_info[4] |= (ar->num_tx_chains - 1) << 2; he_cap_elem->phy_cap_info[5] &= ~IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_MASK; -- 2.7.4
