Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c: In function ‘_rtl8723be_phy_lc_calibrate’:
drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c:2181:36: warning: variable ‘lc_cal’ set but not used [-Wunused-but-set-variable]
Cc: Ping-Ke Shih <pkshih@xxxxxxxxxxx>
Cc: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
Cc: "David S. Miller" <davem@xxxxxxxxxxxxx>
Cc: Jakub Kicinski <kuba@xxxxxxxxxx>
Cc: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
Cc: linux-wireless@xxxxxxxxxxxxxxx
Cc: netdev@xxxxxxxxxxxxxxx
Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
---
drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c
index f09f55b0468a4..2b9313cb93dbd 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c
@@ -2178,7 +2178,7 @@ static u8 _get_right_chnl_place_for_iqk(u8 chnl)
static void _rtl8723be_phy_lc_calibrate(struct ieee80211_hw *hw, bool is2t)
{
u8 tmpreg;
- u32 rf_a_mode = 0, rf_b_mode = 0, lc_cal;
+ u32 rf_a_mode = 0, rf_b_mode = 0;
struct rtl_priv *rtlpriv = rtl_priv(hw);
tmpreg = rtl_read_byte(rtlpriv, 0xd03);
@@ -2202,7 +2202,7 @@ static void _rtl8723be_phy_lc_calibrate(struct ieee80211_hw *hw, bool is2t)
rtl_set_rfreg(hw, RF90_PATH_B, 0x00, MASK12BITS,
(rf_b_mode & 0x8FFFF) | 0x10000);
}
- lc_cal = rtl_get_rfreg(hw, RF90_PATH_A, 0x18, MASK12BITS);
+ rtl_get_rfreg(hw, RF90_PATH_A, 0x18, MASK12BITS);
rtl_set_rfreg(hw, RF90_PATH_A, 0xb0, RFREG_OFFSET_MASK, 0xdfbe0);
rtl_set_rfreg(hw, RF90_PATH_A, 0x18, MASK12BITS, 0x8c0a);
--
2.25.1
