From: Sathishkumar Muruganandam <murugana@xxxxxxxxxxxxxx> [ Upstream commit 99f41b8e43b8b4b31262adb8ac3e69088fff1289 ] When STBC is enabled, NSTS_SU value need to be accounted for VHT NSS calculation for SU case. Without this fix, 1SS + STBC enabled case was reported wrongly as 2SS in radiotap header on monitor mode capture. Tested-on: QCA9984 10.4-3.10-00047 Signed-off-by: Sathishkumar Muruganandam <murugana@xxxxxxxxxxxxxx> Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx> Link: https://lore.kernel.org/r/1597392971-3897-1-git-send-email-murugana@xxxxxxxxxxxxxx Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/net/wireless/ath/ath10k/htt_rx.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c index a65b5d7f59f44..47ac9aa986dcd 100644 --- a/drivers/net/wireless/ath/ath10k/htt_rx.c +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c @@ -657,6 +657,7 @@ static void ath10k_htt_rx_h_rates(struct ath10k *ar, u8 preamble = 0; u8 group_id; u32 info1, info2, info3; + u32 stbc, nsts_su; info1 = __le32_to_cpu(rxd->ppdu_start.info1); info2 = __le32_to_cpu(rxd->ppdu_start.info2); @@ -700,11 +701,16 @@ static void ath10k_htt_rx_h_rates(struct ath10k *ar, TODO check this */ bw = info2 & 3; sgi = info3 & 1; + stbc = (info2 >> 3) & 1; group_id = (info2 >> 4) & 0x3F; if (GROUP_ID_IS_SU_MIMO(group_id)) { mcs = (info3 >> 4) & 0x0F; - nss = ((info2 >> 10) & 0x07) + 1; + nsts_su = ((info2 >> 10) & 0x07); + if (stbc) + nss = (nsts_su >> 2) + 1; + else + nss = (nsts_su + 1); } else { /* Hardware doesn't decode VHT-SIG-B into Rx descriptor * so it's impossible to decode MCS. Also since -- 2.25.1
