Search Linux Wireless

[PATCH 4/7] staging: wfx: fix QoS priority for slow buses

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Jérôme Pouiller <jerome.pouiller@xxxxxxxxxx>

The device is in charge of respecting the QoS constraints. The driver
have to ensure that all the queues contain data and the device choose
the right queue to send.

The things starts to be more difficult when the bandwidth of the bus is
lower than the bandwidth of the WiFi. The device quickly sends the
frames of the highest priority queue. Then, it starts to send frames
from a lower priority queue. Though, there are still some high priority
frames waiting in the driver.

To work around this problem, this patch add some priorities to each
queue. The weigh of the queue was (roughly) calculated experimentally by
checking the speed ratio of each queue when the bus does not limit the
traffic:
    - Be/Bk -> 20Mbps/10Mbps
    - Vi/Be -> 36Mbps/180Kbps
    - Vo/Be -> 35Mbps/600Kbps
    - Vi/Vo -> 24Mbps/12Mbps

So, if we fix the weigh of the Background to 1, the weight of Best
Effort should be 2. The weight of Video should be 116. However, since
there is only 32 queues, it make no sense to use a value greater than
64[1]. And finally, the weight of the Voice is set to 128.

[1] Because of this approximation, with very slow bus, we can still
observe frame starvation when we measure the speed ratio of Vi/Be. It is
around 35Mbps/1Mbps (instead of 36Mbps/180Kbps). However, it is still in
accepted error range.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@xxxxxxxxxx>
---
 drivers/staging/wfx/queue.c | 14 ++++++++++++--
 drivers/staging/wfx/queue.h |  1 +
 2 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/staging/wfx/queue.c b/drivers/staging/wfx/queue.c
index 6e3159165143..55b801a02959 100644
--- a/drivers/staging/wfx/queue.c
+++ b/drivers/staging/wfx/queue.c
@@ -60,11 +60,16 @@ void wfx_tx_lock_flush(struct wfx_dev *wdev)
 
 void wfx_tx_queues_init(struct wfx_vif *wvif)
 {
+	// The device is in charge to respect the details of the QoS parameters.
+	// The driver just ensure that it roughtly respect the priorities to
+	// avoid any shortage.
+	const int priorities[IEEE80211_NUM_ACS] = { 1, 2, 64, 128 };
 	int i;
 
 	for (i = 0; i < IEEE80211_NUM_ACS; ++i) {
 		skb_queue_head_init(&wvif->tx_queue[i].normal);
 		skb_queue_head_init(&wvif->tx_queue[i].cab);
+		wvif->tx_queue[i].priority = priorities[i];
 	}
 }
 
@@ -219,6 +224,11 @@ bool wfx_tx_queues_has_cab(struct wfx_vif *wvif)
 	return false;
 }
 
+static int wfx_tx_queue_get_weight(struct wfx_queue *queue)
+{
+	return atomic_read(&queue->pending_frames) * queue->priority;
+}
+
 static struct sk_buff *wfx_tx_queues_get_skb(struct wfx_dev *wdev)
 {
 	struct wfx_queue *queues[IEEE80211_NUM_ACS * ARRAY_SIZE(wdev->vif)];
@@ -234,8 +244,8 @@ static struct sk_buff *wfx_tx_queues_get_skb(struct wfx_dev *wdev)
 			WARN_ON(num_queues >= ARRAY_SIZE(queues));
 			queues[num_queues] = &wvif->tx_queue[i];
 			for (j = num_queues; j > 0; j--)
-				if (atomic_read(&queues[j]->pending_frames) <
-				    atomic_read(&queues[j - 1]->pending_frames))
+				if (wfx_tx_queue_get_weight(queues[j]) <
+				    wfx_tx_queue_get_weight(queues[j - 1]))
 					swap(queues[j - 1], queues[j]);
 			num_queues++;
 		}
diff --git a/drivers/staging/wfx/queue.h b/drivers/staging/wfx/queue.h
index 22d7c936907f..2695c10d6a22 100644
--- a/drivers/staging/wfx/queue.h
+++ b/drivers/staging/wfx/queue.h
@@ -18,6 +18,7 @@ struct wfx_queue {
 	struct sk_buff_head	normal;
 	struct sk_buff_head	cab; // Content After (DTIM) Beacon
 	atomic_t		pending_frames;
+	int			priority;
 };
 
 void wfx_tx_lock(struct wfx_dev *wdev);
-- 
2.28.0





[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux