From: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
brcmf_sdio_isr() is using in_interrupt() to distinguish if it is called
from a interrupt service routine or from a worker thread.
Passing such information from the calling context is preferred and
requested by Linus, so add an argument `in_isr' to brcmf_sdio_isr() and let
the callers pass the information about the calling context.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@xxxxxxxxxxxxx>
Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Cc: Arend van Spriel <arend.vanspriel@xxxxxxxxxxxx>
Cc: Franky Lin <franky.lin@xxxxxxxxxxxx>
Cc: Hante Meuleman <hante.meuleman@xxxxxxxxxxxx>
Cc: Chi-Hsien Lin <chi-hsien.lin@xxxxxxxxxxx>
Cc: Wright Feng <wright.feng@xxxxxxxxxxx>
Cc: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
Cc: "David S. Miller" <davem@xxxxxxxxxxxxx>
Cc: Jakub Kicinski <kuba@xxxxxxxxxx>
Cc: linux-wireless@xxxxxxxxxxxxxxx
Cc: brcm80211-dev-list.pdl@xxxxxxxxxxxx
Cc: brcm80211-dev-list@xxxxxxxxxxx
Cc: netdev@xxxxxxxxxxxxxxx
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c | 4 ++--
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 4 ++--
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h | 2 +-
3 files changed, 5 insertions(+), 5 deletions(-)
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -73,7 +73,7 @@ static irqreturn_t brcmf_sdiod_oob_irqha
sdiodev->irq_en = false;
}
- brcmf_sdio_isr(sdiodev->bus);
+ brcmf_sdio_isr(sdiodev->bus, true);
return IRQ_HANDLED;
}
@@ -85,7 +85,7 @@ static void brcmf_sdiod_ib_irqhandler(st
brcmf_dbg(INTR, "IB intr triggered\n");
- brcmf_sdio_isr(sdiodev->bus);
+ brcmf_sdio_isr(sdiodev->bus, false);
}
/* dummy handler for SDIO function 2 interrupt */
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -3625,7 +3625,7 @@ void brcmf_sdio_trigger_dpc(struct brcmf
}
}
-void brcmf_sdio_isr(struct brcmf_sdio *bus)
+void brcmf_sdio_isr(struct brcmf_sdio *bus, bool in_isr)
{
brcmf_dbg(TRACE, "Enter\n");
@@ -3636,7 +3636,7 @@ void brcmf_sdio_isr(struct brcmf_sdio *b
/* Count the interrupt call */
bus->sdcnt.intrcount++;
- if (in_interrupt())
+ if (in_isr)
atomic_set(&bus->ipend, 1);
else
if (brcmf_sdio_intr_rstatus(bus)) {
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.h
@@ -372,7 +372,7 @@ int brcmf_sdiod_remove(struct brcmf_sdio
struct brcmf_sdio *brcmf_sdio_probe(struct brcmf_sdio_dev *sdiodev);
void brcmf_sdio_remove(struct brcmf_sdio *bus);
-void brcmf_sdio_isr(struct brcmf_sdio *bus);
+void brcmf_sdio_isr(struct brcmf_sdio *bus, bool in_isr);
void brcmf_sdio_wd_timer(struct brcmf_sdio *bus, bool active);
void brcmf_sdio_wowl_config(struct device *dev, bool enabled);
