Search Linux Wireless

Re: [PATCH] ath11k: Add support spectral scan for IPQ6018

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Karthikeyan Periyasamy <periyasa@xxxxxxxxxxxxxx> wrote:

> IPQ6018 supported with 4 bytes FFT BIN size. so supported 4 bytes
> parsing logic in FFT report process.
> 
> Tested-on: IPQ6018 WLAN.HK.2.1.0.1-01228-QCAHKSWPL_SILICONZ-1
> 
> Note: This is based on below patches
> 	1. ath11k: add IPQ6018 support
> 	2. ath11k: add support for spectral scan
> 	3. ath11k: Add direct buffer ring support
> 
> Signed-off-by: Karthikeyan Periyasamy <periyasa@xxxxxxxxxxxxxx>

Does not apply anymore, please rebase. Also you should investigate how
it works with QCA6390.

error: patch failed: drivers/net/wireless/ath/ath11k/core.c:26
error: drivers/net/wireless/ath/ath11k/core.c: patch does not apply
error: patch failed: drivers/net/wireless/ath/ath11k/hw.h:117
error: drivers/net/wireless/ath/ath11k/hw.h: patch does not apply
stg import: Diff does not apply cleanly

Patch set to Changes Requested.

-- 
https://patchwork.kernel.org/patch/11594815/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches




[Index of Archives]     [Linux Host AP]     [ATH6KL]     [Linux Wireless Personal Area Network]     [Linux Bluetooth]     [Wireless Regulations]     [Linux Netdev]     [Kernel Newbies]     [Linux Kernel]     [IDE]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite Hiking]     [MIPS Linux]     [ARM Linux]     [Linux RAID]

  Powered by Linux