This commit adds wcn36xx_smd_set_bss_vht_params(). The job of this function
is to decide if the BSS is VHT capable and if so set the appropriate bit
in the BSS parameter structure for passing to the firmware.
VHT Channel width set is not set since we don't support 160MHz.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
---
drivers/net/wireless/ath/wcn36xx/smd.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/drivers/net/wireless/ath/wcn36xx/smd.c b/drivers/net/wireless/ath/wcn36xx/smd.c
index ab9b6116cc75..d5089aa382bd 100644
--- a/drivers/net/wireless/ath/wcn36xx/smd.c
+++ b/drivers/net/wireless/ath/wcn36xx/smd.c
@@ -146,6 +146,19 @@ static void wcn36xx_smd_set_bss_ht_params(struct ieee80211_vif *vif,
}
}
+void
+wcn36xx_smd_set_bss_vht_params(struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ struct wcn36xx_hal_config_bss_params_v1 *bss);
+void
+wcn36xx_smd_set_bss_vht_params(struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ struct wcn36xx_hal_config_bss_params_v1 *bss)
+{
+ if (sta && sta->vht_cap.vht_supported)
+ bss->vht_capable = 1;
+}
+
static void wcn36xx_smd_set_sta_ht_params(struct ieee80211_sta *sta,
struct wcn36xx_hal_config_sta_params *sta_params)
{
--
2.27.0
