This series is one in a set of seven to add support for wcn3680 at 802.11ac data-rates. V4: - No functional change. Sending out full set again using --base=ath-202009090652 to aid kernel test robot - https://lore.kernel.org/linux-wireless/20200908182428.2870226-1-bryan.odonoghue@xxxxxxxxxx/T/#t V3: In order to pass VHT parameters to the firmware, we need to extend the parameter data-structure. In the V2 series, this was accomplished in two patches. https://lore.kernel.org/linux-wireless/20200829033908.2167689-13-bryan.odonoghue@xxxxxxxxxx/T/#u https://lore.kernel.org/linux-wireless/20200829033908.2167689-2-bryan.odonoghue@xxxxxxxxxx/T/#u However since I was rebasing this series anyway I thought it would be a better idea to do the conversion in one go, so that if someone is rebasing/bisecting in the future every single patch will still be functional and testable on wcn3620. If the data-structure is extended and then the code is subsequently updated, then the patches in-between the data-structure update and the code update will not be testable on hardware. As a result I've opted to front-load the conversion. The first patch is atomic with respect to ongoing functionality on wcn3620, which I think is a better result for not much extra code. The eventual enabling for wcn3680 comes in a later patch in a later set. For a similar reason I thought it best to front-load the conversion to using the extended V1 data-structure for storing parameters internal to the driver. Bryan O'Donoghue (2): wcn36xx: Add VHT fields to parameter data structures wcn36xx: Use V1 data structure to store supported rates drivers/net/wireless/ath/wcn36xx/hal.h | 14 +++++++++++++- drivers/net/wireless/ath/wcn36xx/smd.c | 7 +++++-- drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 2 +- 3 files changed, 19 insertions(+), 4 deletions(-) base-commit: 160b351d75cb50a0dd2abf9b63e1891935aa9e4a -- 2.27.0
