This patch refactors some code and moves the scan RX function
to scan.c. More importantly, however, it changes it so that the
MLME's beacon/probe_resp functions aren't invoked when scanning
so that we can remove a "if (scanning)" conditions from two
places.
There's a very slight behavioural change in this patch: now,
when scanning, IBSS and mesh aren't updated even on the same
channel.
Signed-off-by: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
---
net/mac80211/ieee80211_i.h | 9 +
net/mac80211/mlme.c | 253 ++++++++++++++++++++-------------------------
net/mac80211/scan.c | 68 ++++++++++++
3 files changed, 194 insertions(+), 136 deletions(-)
--- everything.orig/net/mac80211/mlme.c 2008-09-08 15:42:42.000000000 +0200
+++ everything/net/mac80211/mlme.c 2008-09-08 15:42:45.000000000 +0200
@@ -128,10 +128,9 @@ static void __ieee80211_rx_bss_hash_del(
}
static struct ieee80211_sta_bss *
-ieee80211_rx_bss_add(struct ieee80211_sub_if_data *sdata, u8 *bssid, int freq,
+ieee80211_rx_bss_add(struct ieee80211_local *local, u8 *bssid, int freq,
u8 *ssid, u8 ssid_len)
{
- struct ieee80211_local *local = sdata->local;
struct ieee80211_sta_bss *bss;
bss = kzalloc(sizeof(*bss), GFP_ATOMIC);
@@ -230,8 +229,8 @@ static void ieee80211_rx_bss_free(struct
kfree(bss);
}
-static void ieee80211_rx_bss_put(struct ieee80211_local *local,
- struct ieee80211_sta_bss *bss)
+void ieee80211_rx_bss_put(struct ieee80211_local *local,
+ struct ieee80211_sta_bss *bss)
{
local_bh_disable();
if (!atomic_dec_and_lock(&bss->users, &local->sta_bss_lock)) {
@@ -2444,74 +2443,16 @@ static u64 ieee80211_sta_get_mandatory_r
return mandatory_rates;
}
-static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
- struct ieee80211_mgmt *mgmt,
- size_t len,
- struct ieee80211_rx_status *rx_status,
- struct ieee802_11_elems *elems)
+struct ieee80211_sta_bss *
+ieee80211_bss_info_update(struct ieee80211_local *local,
+ struct ieee80211_rx_status *rx_status,
+ struct ieee80211_mgmt *mgmt,
+ size_t len,
+ struct ieee802_11_elems *elems,
+ int freq, bool beacon)
{
- struct ieee80211_local *local = sdata->local;
- int freq, clen;
struct ieee80211_sta_bss *bss;
- struct sta_info *sta;
- struct ieee80211_channel *channel;
- u64 beacon_timestamp, rx_timestamp;
- u64 supp_rates = 0;
- bool beacon = ieee80211_is_beacon(mgmt->frame_control);
- enum ieee80211_band band = rx_status->band;
- DECLARE_MAC_BUF(mac);
- DECLARE_MAC_BUF(mac2);
-
- if (elems->ds_params && elems->ds_params_len == 1)
- freq = ieee80211_channel_to_frequency(elems->ds_params[0]);
- else
- freq = rx_status->freq;
-
- channel = ieee80211_get_channel(local->hw.wiphy, freq);
-
- if (!channel || channel->flags & IEEE80211_CHAN_DISABLED)
- return;
-
- if (ieee80211_vif_is_mesh(&sdata->vif) && elems->mesh_id &&
- elems->mesh_config && mesh_matches_local(elems, sdata)) {
- supp_rates = ieee80211_sta_get_rates(local, elems, band);
-
- mesh_neighbour_update(mgmt->sa, supp_rates, sdata,
- mesh_peer_accepts_plinks(elems));
- }
-
- if (sdata->vif.type == IEEE80211_IF_TYPE_IBSS && elems->supp_rates &&
- memcmp(mgmt->bssid, sdata->u.sta.bssid, ETH_ALEN) == 0) {
- supp_rates = ieee80211_sta_get_rates(local, elems, band);
-
- rcu_read_lock();
-
- sta = sta_info_get(local, mgmt->sa);
- if (sta) {
- u64 prev_rates;
-
- prev_rates = sta->supp_rates[band];
- /* make sure mandatory rates are always added */
- sta->supp_rates[band] = supp_rates |
- ieee80211_sta_get_mandatory_rates(local, band);
-
-#ifdef CONFIG_MAC80211_IBSS_DEBUG
- if (sta->supp_rates[band] != prev_rates)
- printk(KERN_DEBUG "%s: updated supp_rates set "
- "for %s based on beacon info (0x%llx | "
- "0x%llx -> 0x%llx)\n",
- sdata->dev->name, print_mac(mac, sta->addr),
- (unsigned long long) prev_rates,
- (unsigned long long) supp_rates,
- (unsigned long long) sta->supp_rates[band]);
-#endif
- } else {
- ieee80211_ibss_add_sta(sdata, NULL, mgmt->bssid,
- mgmt->sa, supp_rates);
- }
-
- rcu_read_unlock();
- }
+ int clen;
#ifdef CONFIG_MAC80211_MESH
if (elems->mesh_config)
@@ -2529,10 +2470,10 @@ static void ieee80211_rx_bss_info(struct
elems->mesh_config_len, freq);
else
#endif
- bss = ieee80211_rx_bss_add(sdata, mgmt->bssid, freq,
+ bss = ieee80211_rx_bss_add(local, mgmt->bssid, freq,
elems->ssid, elems->ssid_len);
if (!bss)
- return;
+ return NULL;
} else {
#if 0
/* TODO: order by RSSI? */
@@ -2579,17 +2520,114 @@ static void ieee80211_rx_bss_info(struct
bss->supp_rates_len += clen;
}
- bss->band = band;
+ bss->band = rx_status->band;
- beacon_timestamp = le64_to_cpu(mgmt->u.beacon.timestamp);
-
- bss->timestamp = beacon_timestamp;
+ bss->timestamp = le64_to_cpu(mgmt->u.beacon.timestamp);
bss->last_update = jiffies;
bss->signal = rx_status->signal;
bss->noise = rx_status->noise;
bss->qual = rx_status->qual;
+ bss->wmm_used = elems->wmm_param || elems->wmm_info;
+
if (!beacon)
bss->last_probe_resp = jiffies;
+
+ /*
+ * For probe responses, or if we don't have any information yet,
+ * use the IEs from the beacon.
+ */
+ if (!bss->ies || !beacon) {
+ if (bss->ies == NULL || bss->ies_len < elems->total_len) {
+ kfree(bss->ies);
+ bss->ies = kmalloc(elems->total_len, GFP_ATOMIC);
+ }
+ if (bss->ies) {
+ memcpy(bss->ies, elems->ie_start, elems->total_len);
+ bss->ies_len = elems->total_len;
+ } else
+ bss->ies_len = 0;
+ }
+
+ return bss;
+}
+
+static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
+ struct ieee80211_mgmt *mgmt,
+ size_t len,
+ struct ieee80211_rx_status *rx_status,
+ struct ieee802_11_elems *elems,
+ bool beacon)
+{
+ struct ieee80211_local *local = sdata->local;
+ int freq;
+ struct ieee80211_sta_bss *bss;
+ struct sta_info *sta;
+ struct ieee80211_channel *channel;
+ u64 beacon_timestamp, rx_timestamp;
+ u64 supp_rates = 0;
+ enum ieee80211_band band = rx_status->band;
+ DECLARE_MAC_BUF(mac);
+ DECLARE_MAC_BUF(mac2);
+
+ if (elems->ds_params && elems->ds_params_len == 1)
+ freq = ieee80211_channel_to_frequency(elems->ds_params[0]);
+ else
+ freq = rx_status->freq;
+
+ channel = ieee80211_get_channel(local->hw.wiphy, freq);
+
+ if (!channel || channel->flags & IEEE80211_CHAN_DISABLED)
+ return;
+
+ if (ieee80211_vif_is_mesh(&sdata->vif) && elems->mesh_id &&
+ elems->mesh_config && mesh_matches_local(elems, sdata)) {
+ supp_rates = ieee80211_sta_get_rates(local, elems, band);
+
+ mesh_neighbour_update(mgmt->sa, supp_rates, sdata,
+ mesh_peer_accepts_plinks(elems));
+ }
+
+ if (sdata->vif.type == IEEE80211_IF_TYPE_IBSS && elems->supp_rates &&
+ memcmp(mgmt->bssid, sdata->u.sta.bssid, ETH_ALEN) == 0) {
+ supp_rates = ieee80211_sta_get_rates(local, elems, band);
+
+ rcu_read_lock();
+
+ sta = sta_info_get(local, mgmt->sa);
+ if (sta) {
+ u64 prev_rates;
+
+ prev_rates = sta->supp_rates[band];
+ /* make sure mandatory rates are always added */
+ sta->supp_rates[band] = supp_rates |
+ ieee80211_sta_get_mandatory_rates(local, band);
+
+#ifdef CONFIG_MAC80211_IBSS_DEBUG
+ if (sta->supp_rates[band] != prev_rates)
+ printk(KERN_DEBUG "%s: updated supp_rates set "
+ "for %s based on beacon info (0x%llx | "
+ "0x%llx -> 0x%llx)\n",
+ sdata->dev->name, print_mac(mac, sta->addr),
+ (unsigned long long) prev_rates,
+ (unsigned long long) supp_rates,
+ (unsigned long long) sta->supp_rates[band]);
+#endif
+ } else {
+ ieee80211_ibss_add_sta(sdata, NULL, mgmt->bssid,
+ mgmt->sa, supp_rates);
+ }
+
+ rcu_read_unlock();
+ }
+
+ bss = ieee80211_bss_info_update(local, rx_status, mgmt, len, elems,
+ freq, beacon);
+ if (!bss)
+ return;
+
+ /* was just updated in ieee80211_bss_info_update */
+ beacon_timestamp = bss->timestamp;
+
/*
* In STA mode, the remaining parameters should not be overridden
* by beacons because they're not necessarily accurate there.
@@ -2600,21 +2638,8 @@ static void ieee80211_rx_bss_info(struct
return;
}
- if (bss->ies == NULL || bss->ies_len < elems->total_len) {
- kfree(bss->ies);
- bss->ies = kmalloc(elems->total_len, GFP_ATOMIC);
- }
- if (bss->ies) {
- memcpy(bss->ies, elems->ie_start, elems->total_len);
- bss->ies_len = elems->total_len;
- } else
- bss->ies_len = 0;
-
- bss->wmm_used = elems->wmm_param || elems->wmm_info;
-
/* check if we need to merge IBSS */
if (sdata->vif.type == IEEE80211_IF_TYPE_IBSS && beacon &&
- !local->sta_sw_scanning && !local->sta_hw_scanning &&
bss->capability & WLAN_CAPABILITY_IBSS &&
bss->freq == local->oper_channel->center_freq &&
elems->ssid_len == sdata->u.sta.ssid_len &&
@@ -2691,7 +2716,7 @@ static void ieee80211_rx_mgmt_probe_resp
ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen,
&elems);
- ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems);
+ ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems, false);
/* direct probe may be part of the association flow */
if (test_and_clear_bit(IEEE80211_STA_REQ_DIRECT_PROBE,
@@ -2722,7 +2747,7 @@ static void ieee80211_rx_mgmt_beacon(str
ieee802_11_parse_elems(mgmt->u.beacon.variable, len - baselen, &elems);
- ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems);
+ ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems, true);
if (sdata->vif.type != IEEE80211_IF_TYPE_STA)
return;
@@ -2732,15 +2757,6 @@ static void ieee80211_rx_mgmt_beacon(str
memcmp(ifsta->bssid, mgmt->bssid, ETH_ALEN) != 0)
return;
- /* Do not send changes to driver if we are scanning. This removes
- * requirement that a driver's bss_info_changed/conf_tx functions
- * need to be atomic.
- * This is really ugly code, we should rewrite scanning and make
- * all this more understandable for humans.
- */
- if (local->sta_sw_scanning || local->sta_hw_scanning)
- return;
-
ieee80211_sta_wmm_params(local, ifsta, elems.wmm_param,
elems.wmm_param_len);
@@ -2983,41 +2999,6 @@ static void ieee80211_sta_rx_queued_mgmt
}
-ieee80211_rx_result
-ieee80211_sta_rx_scan(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
- struct ieee80211_rx_status *rx_status)
-{
- struct ieee80211_mgmt *mgmt;
- __le16 fc;
-
- if (skb->len < 2)
- return RX_DROP_UNUSABLE;
-
- mgmt = (struct ieee80211_mgmt *) skb->data;
- fc = mgmt->frame_control;
-
- if (ieee80211_is_ctl(fc))
- return RX_CONTINUE;
-
- if (skb->len < 24)
- return RX_DROP_MONITOR;
-
- if (ieee80211_is_probe_resp(fc)) {
- ieee80211_rx_mgmt_probe_resp(sdata, mgmt, skb->len, rx_status);
- dev_kfree_skb(skb);
- return RX_QUEUED;
- }
-
- if (ieee80211_is_beacon(fc)) {
- ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len, rx_status);
- dev_kfree_skb(skb);
- return RX_QUEUED;
- }
-
- return RX_CONTINUE;
-}
-
-
static int ieee80211_sta_active_ibss(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_local *local = sdata->local;
@@ -3234,7 +3215,7 @@ static int ieee80211_sta_create_ibss(str
printk(KERN_DEBUG "%s: Creating new IBSS network, BSSID %s\n",
sdata->dev->name, print_mac(mac, bssid));
- bss = ieee80211_rx_bss_add(sdata, bssid,
+ bss = ieee80211_rx_bss_add(local, bssid,
local->hw.conf.channel->center_freq,
sdata->u.sta.ssid, sdata->u.sta.ssid_len);
if (!bss)
--- everything.orig/net/mac80211/scan.c 2008-09-08 15:42:42.000000000 +0200
+++ everything/net/mac80211/scan.c 2008-09-08 15:42:45.000000000 +0200
@@ -23,6 +23,74 @@
#define IEEE80211_PASSIVE_CHANNEL_TIME (HZ / 5)
+ieee80211_rx_result
+ieee80211_sta_rx_scan(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb,
+ struct ieee80211_rx_status *rx_status)
+{
+ struct ieee80211_mgmt *mgmt;
+ struct ieee80211_sta_bss *bss;
+ u8 *elements;
+ struct ieee80211_channel *channel;
+ size_t baselen;
+ int freq;
+ __le16 fc;
+ bool presp, beacon = false;
+ struct ieee802_11_elems elems;
+
+ if (skb->len < 2)
+ return RX_DROP_UNUSABLE;
+
+ mgmt = (struct ieee80211_mgmt *) skb->data;
+ fc = mgmt->frame_control;
+
+ if (ieee80211_is_ctl(fc))
+ return RX_CONTINUE;
+
+ if (skb->len < 24)
+ return RX_DROP_MONITOR;
+
+ presp = ieee80211_is_probe_resp(fc);
+ if (presp) {
+ /* ignore ProbeResp to foreign address */
+ if (memcmp(mgmt->da, sdata->dev->dev_addr, ETH_ALEN))
+ return RX_DROP_MONITOR;
+
+ presp = true;
+ elements = mgmt->u.probe_resp.variable;
+ baselen = offsetof(struct ieee80211_mgmt, u.probe_resp.variable);
+ } else {
+ beacon = ieee80211_is_beacon(fc);
+ baselen = offsetof(struct ieee80211_mgmt, u.beacon.variable);
+ elements = mgmt->u.beacon.variable;
+ }
+
+ if (!presp && !beacon)
+ return RX_CONTINUE;
+
+ if (baselen > skb->len)
+ return RX_DROP_MONITOR;
+
+ ieee802_11_parse_elems(elements, skb->len - baselen, &elems);
+
+ if (elems.ds_params && elems.ds_params_len == 1)
+ freq = ieee80211_channel_to_frequency(elems.ds_params[0]);
+ else
+ freq = rx_status->freq;
+
+ channel = ieee80211_get_channel(sdata->local->hw.wiphy, freq);
+
+ if (!channel || channel->flags & IEEE80211_CHAN_DISABLED)
+ return RX_DROP_MONITOR;
+
+ bss = ieee80211_bss_info_update(sdata->local, rx_status,
+ mgmt, skb->len, &elems,
+ freq, beacon);
+ ieee80211_rx_bss_put(sdata->local, bss);
+
+ dev_kfree_skb(skb);
+ return RX_QUEUED;
+}
+
static void ieee80211_send_nullfunc(struct ieee80211_local *local,
struct ieee80211_sub_if_data *sdata,
int powersave)
--- everything.orig/net/mac80211/ieee80211_i.h 2008-09-08 15:42:42.000000000 +0200
+++ everything/net/mac80211/ieee80211_i.h 2008-09-08 15:42:45.000000000 +0200
@@ -937,6 +937,15 @@ void ieee802_11_parse_elems(u8 *start, s
void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local);
int ieee80211_sta_start_scan(struct ieee80211_sub_if_data *scan_sdata,
u8 *ssid, size_t ssid_len);
+struct ieee80211_sta_bss *
+ieee80211_bss_info_update(struct ieee80211_local *local,
+ struct ieee80211_rx_status *rx_status,
+ struct ieee80211_mgmt *mgmt,
+ size_t len,
+ struct ieee802_11_elems *elems,
+ int freq, bool beacon);
+void ieee80211_rx_bss_put(struct ieee80211_local *local,
+ struct ieee80211_sta_bss *bss);
#ifdef CONFIG_MAC80211_MESH
void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata);
--
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
